Cost pressure in manufacturing continues to increase. Therefore, new solutions are needed to manufacture components and products cost-effectively and efficiently.
29. March 2021
In 2017, Werkzeugschleiferei Hugo Limmer started a test phase of the Blaser grinding oil Blasogrind GTC 7. The goals were ambitious, but Blasogrind convinced all along the way. With the high-performance grinding oil, Hugo Limmer manufactures more efficiently and saves around 67,000 euros per year.
17. December 2020
With our FOBA Lease Program you'll benefit from more planning security and financial flexibility. Check our attractive leasing offers for our complete product range, from laser marking rails to turn-key laser marking machines with vision.
2. September 2020
For their aerospace applications, Western Precision Products must simultaneously achieve tight tolerances and high part quality while having low-volume production. Tyler Bureau, director of manufacturing technology, explains why hyperMILL is critical for success in their new prototype department.
17. August 2020
Control them instead of fighting them – Learn from our microbiologists how to control the bacteria in your coolant and how you can even use them with our Bio-Concept.
29. June 2020
AMI Industries, a precision manufacturer in Tainan, Taiwan, set ambitious targets for the use of Blaser Swisslube metalworking fluids for its new machining centre. With the holistic approach of Blaser Swisslube and a change to the metalworking fluid B-Cool 755, all these goals were achieved.
15. June 2020
This webinar shows you how important it is to monitor and maintain your metalworking fluid regularly. You will learn how you can do this yourself and how our Liquid Tool experts can support you on site. Your hosts are Manuel Schlaeppi and Etienne Jeanquartier from our customer service.
11. November 2019
B-Cool MC 610 is ideal for general machining with a signiﬁcant share of copper-base alloys. Clean machines, stable processes stand out. Excellent ﬁlterability even with cast iron.
13. August 2019
The optimization of tool life (and thus costs) was the main objective of tool manufacturer Ifanger AG when the company began its collaboration with Blaser Swisslube in 2017. Following a detailed analysis, the production was changed over to B-Cool—with excellent results.
9. May 2019
Your perfect installation ready component thanks broad knowledge and a lot of experience.
hould it be beneficial for you or you don't have the facilities or the capacity, we will assume the overall responsibility fo the delivery of finished drawing parts based on our plate materials.
7. May 2019
With Drymex® sludge dryers you reduce your disposal costs by up to 60%. Government sponsored drying technology with heat pump – reliable, uniform and low-energy drying in a closed system.
2. May 2019
High-quality tools, jigs, and fixtures, manufactured on on multiple Ultimaker 3D printers, save Volkswagen Autoeuropa an estimated 325'000 Euro per year.
This program is part of the “Smart Industry” line of the Hightech Systems & Materials program of the province of Noord Brabant, which has been drafted by companies, knowledge institutes, educators and sector associations in close cooperation with the province of Noord Brabant, Brainport Industries.
17. April 2019
As an alternative to expansion or renewal of existing plant, it is possible to apply multi-level optimization techniques capable of correcting inefficiencies due to the gap between the complexity of transport system and the simplicity of control logics, with incredible economic savings.
10. April 2019
SINUMERIK 840D sl is considered to be the standard in the premium class CNCs, which is certainly justified. Maximum CNC performance, along with a high degree of flexibility and openness – which has been unachievable up until now – represent the basis for almost every machine concept.
3. April 2019
Increase your productivity with the unique features of a 5-axis machine tool: The UMC-750 is an affordable solution for 3+2 machining and simultaneous 5-axis work, on a platform that is intuitive and easy to use.
1. April 2019
Within a few days from the CAD-model to real injection molded parts. Prototypes made from production grade materials. Economical production of small-batch injection molding runs. All with the help of additive manufactured injection molding tools and the agile production process of Injex.
19. March 2019
A fork piece has four bore edges. Two of them are difficult to access. This report shows how the deburring of all 4 edges can be done in an efficient and process capable way and without requiring to reclamp the workpiece.
18. March 2019
In recent years, the demand for machines with MMS systems for the lubrication of tools in the machining area has developed. The solution of DropsA ensures continuous lubrication of the workpiece and makes working with band saws more efficient, resulting in increased productivity and reduced costs.
14. March 2019
Fiber disc with geometrically shaped ceramic abrasive grain. Defines itself in a defined way and creates always new sharp edges. Your advantage: Processing of more workpieces in the same time (up to 30% more removal compared to previous leading ceramic abrasives)
11. March 2019
Unsere neuste Entwicklung sind Spannzangenfutter mit Hubeinstellung. Mit den Futtertypen FNO-K, FNP-KAH und FNF-KAH können dünnwandige oder formschlüssige Werkstücke, wie Ringe, Scheiben, Hülsen, usw. durch die mechanische Hubeinstellung deformationsfrei und prozesssicher gespannt werden.
8. March 2019
Spot facing at the edge of the hole pose a challenge due to poorly accessible areas or limited machining space. Find out how Starrag AG was able to solve this problem and thus increase both its efficiency and process reliability.
5. March 2019
Blasogrind GTS 15 offers a higher feed performance. The extended grinding burn limit allows for higher feed rates and thus an increased material removal rate.
"Synergy 735 looks like water and is my clear choice", explains Influencer and owner of Titans of CNC Academy, Titan Gilroy. Neutral odor and excellent skin compatibility of the full-synthetic product convince.
More than just a coolant supplier – for its customer Laubscher Präzision AG, Blaser Swisslube reproduced and optimized the entire production process in its in-house technology center. The results are convincing: a reduced cycle time of over 16% and an extended tool life of about 15%.
28. February 2019
The improvement of the production process, increasing the the tool life, the improvement of the working environment and the reduction of the working times and production costs, are the advantages coming by MiQueL using.
Högg Profilen opens up many new possibilities for you. Regardless of the material, we supply you with precise profiles that are individually adapted to your needs. With dimensional tolerances in the micrometer range, we manufacture profiles in all metallic materials.
20. February 2019
Many pride themselves with tool management. But who can offer you perfect integration into your overall process? Data consistency from the CAM system through to the machine? With real tool data or downloaded from the cloud, ready for programming? ZOLLER can.
18. February 2019
SIM Automation GmbH was looking for a tool management system that would enable the integration of a wide variety of machines and software manufacturers. Find out how the company was able to achieve six-figure savings with the new system.
13. February 2019
The company Fankhauser Engineering AG knows how important highly flexible machines with long running times are in order to be able to produce profitably. The use of MFC milling cutters enables significant savings in purchasing, tool preparation, machine setup and tool costs.
8. February 2019
Economic front and back chamfering in one operation, with very easy blade changes. Removes burrs radially without requiring the work piece to be turned.
BSF allows back spotfacing up 2.3 times the bore diameter. It enables the machining of spot facings and counterbores without reclamping of the work piece.
Consistent deburring of even and uneven bore edges, front and back in one single pass. Both bore edges will be machined without requiring the work piece to be turned. For efficient and process capable high volume production.
7. February 2019
A customer was looking for bar feeders and air filter systems for its machine tools that would guarantee maximum productivity while taking up as little space as possible. Find out how the solution of LNS Europe met these criteria and how at the same time the production layout could be optimized.
The LNS customer service and technical support teams are the industry’s most experienced. They provide expert product selection and application assistance, professional installation and comprehensive training.
We support every product we sell with replacement parts.
LNS ChipBlaster JV-40, the ideal high-pressure coolant solution, designed with variable flows and pressures, to deliver clean filtered coolant for maximum machining productivity.
5. February 2019
The new DURO-A RC power chuck delivers as a true PRICE-PERFORMANCE CHAMPION across the board. With the quick jaw change system and individual unlocking, the jaws can be changed, moved or turned flexibly and with less set-up time in just 50 SECONDS.
4. February 2019
At the steel trader Kicherer things got tight again: the growing demands for ever shorter delivery times made a more efficient warehouse unavoidable. With the KASTO solution, the company can ensure its high delivery quality and speed with a growing product range.
29. January 2019
For over 40 years Trimos has offered a wide range of products and solutions in the field of dimensional metrology. Find out how the company was able to increase its productivity and flexibility by using the FEHLMANN VERSA 825.
23. January 2019
Bronze, brass, aluminum mechanical parts according to the customer drawing. Both serial production and little batches. UNI EN ISO 9001:2015 certified.
A manufacturer of medical equipment wanted to reduce his cycle time in order to be able to offer his workpieces cost-effectively. Learn how a Denitool expert's recommendation reduced the cycle time and lowered the manufacturing costs.
16. January 2019
Six sharply ground cutting edges mounted tangentially on the milling body ensure excellent tool life and process reliability. This increases productivity and improves the quality of the workpiece.
10. January 2019
For tube machining on a special lathe, no standard ISO tools could take over the task. Read how Denitool developed a special tool that allows the machine to process two tube ends simultaneously.
SynTool is adapted for standard holders. Achieve around 70% cost savings per edge compared to monobloc inserts. For applications which are not possible with standard monobloc turning inserts, we offer HM-shank inserts for Denitool® inserts.
For more than 40 years we are engaged in the production of elements and details in ABS, PST, PE Polypropylene compound. Efficiency, quality, and reliability are the keywords of our activity.
3. January 2019
Weiss AG stands for innovative and productivity-increasing Diamond and CBN tools. With the M-Dresser you can dress diamond and CBN grinding wheels very easily and quickly.
29. November 2018
LIFE. COMBINED INTELLIGENTLY.
A functioning organism in which all LIFE components interact intelligently. Whether for a single SW machine, a fully automated system or a complete production line. We supply and support everything for you to guarantee efficient production for years to com.
19. November 2018
The Hermle C 650 3- or 5-axis machining centre from Hermle is a significant addition to the Performance-Line series and sets new standards in economical parts production.
7. November 2018
With the 5th axis provided by the workpiece, the 5-axis machining centre from the HF series deliver a significant reduction in idle times in combination with the powerful dynamics and a horizontal spindle for shortest chip-to-chip times
Since 1936, Blaser Swisslube has stood for lubricant solutions that offer measurable added value and are gentle to people and the environment.
Consulting / Sales / Service of Alltec GmbH - FOBA laser marking machines, Photon Energy - Ultra short pulse laser, OWIS - Optical beam guidance and positioning systems manual and motorized, ISEL - CNC machines, Automation, aluminum profiles,
OPEN MIND develops optimized CAM solutions that include a high number of innovative features not available elsewhere to deliver significantly higher performance. OPEN MIND strives to be the best and most innovative CAD/CAM manufacturer in the world
Precision in steel and aluminium
No more unreliable drying! Reliable, fast and gentle drying at low temperatures using heat pump technology in a closed system – we have solved drying problems and optimized processes for more than 25 years. Our energy-saving dryers are eligible for government allowance.
DIM3NSIONS is your partner for the successful start with in-house 3D printing. With professional 3D printers from Ultimaker and Formlabs as well as a wide portfolio of accessories and materials and customized trainings, our customers are in good hands.
from Aesch ZH,
Tier-one, tier-two and tier-three suppliers in the open high-tech supply chain in the Netherlands have joined forces to create Brainport Industries. Together, they form a unique ecosystem that can manage the entire supply chain for high-mix, low volume, high complexity systems and components.
We are Partner for Innovation. We provide the Customer with excellent know-how and skills that allow us to tackle projects with a systemic approach: customized electronic design, innovative solutions for industry, automation, software development, smart device design, wearable and cloud computing.
Digitalization is deeply and permanently changing the manufacturing process. With our unique and comprehensive portfolio of digitalization products, we guide you on your way to digitalization.
URMA is your competent supplier for CNC machines, 3D printers and automation solutions in Switzerland. Newly we offer, besides composite printers from Markforged, also polymer and metal 3D printers from EOS. URMA is also a Swiss manufacturer of high-performance tools for precise hole making.
Injex offers an injection molding service which is based on additive tooling. This reduces lead times for injection molded prototypes and small series from several weeks to a few days.
What ultimately counts is your bottom line. Front and back bore machining of bore edges in one single pass without having to turn the workpiece will enable you to reduce your production times and to increase the process capability at the same time.
Since 1946 Dropsa has been producing centralized lubrication systems and components developing many ideas and products that have shaped our industry.Today our innovation is ever present showcasing new products and technology to the global market.
PFERD-VSM is Switzerland is leading competence partner in the field of overall grinding technology solutions for the metalworking industry. We offer a comprehensive and unique product range of tools and abrasives for surface treatment. All from one hand.
FN Niederhauser AG was founded by Fritz Niederhauser at the end of November 1989. The machine tool park was successively adapted to customer requirements and conti¬nuously renewed. On 1 January 2015, FN Niederhauser AG was taken over by a long-standing employee, Roland Helfenstein.
Högg AG now counts as a major player throughout Europe, with a specialist range of high-performance mechanical manufacturing technology that includes engineering and systems management services.
ZOLLER is the expert for more economic production. ZOLLER combines presetting, measuring and inspection machines with software and automation solutions for the efficient presetting, measuring, inspecting and managing of cutting tools.
from ST. GALLEN,
State-of-the-art technology, inventiveness and customer focus. Three factors that have made FRAISA a success on the world market for cutting tools.«passion for precision» is a commitment and a key note: Welcome to FRAISA!
LNS, your One-Stop-Shop for machine-tool peripherals.
Founded in 1909, RÖHM is now one of the leading chucking tool manufacturers with a wide and powerful product range.
In 2016 KASTO SChweiz AG, based in Rheinfelden, Germany, was founded as another subsidiary of KASTO Maschinenbau, DE. We are proud of the satisfaction of our customers and of the countless sawing machines and storage systems, which are installed nationwide at various customers.
Fehlmann AG develops and manufactures precision machine tools for drilling and milling purposes. Since its founding in 1930, the company has supplied over 12000 machines worldwide. Development, production and assembly are carried out exclusively at the works in Seon, Switzerland.
Specializing in bronze, brass and aluminum casting as well as high-precision mechanical processing.
We are a successful company in the manufacturing industry. At Denitool, cutting tools are developed and manufactured. The product portfolio includes milling cutters, boring bars, indexable inserts and system tools.
Technology across borders. Four generations of innovation and passion have made ALESA the company it is today. Our family business has stood for first-class tools since 1934. ALESA stands for high-quality tools in terms of machining performance and life span, which makes for long-term relationships.
Lampa Plastic is operating in Thermoforming sector since 1971Recently acquired by a new managing group of entrepreneursRenewed Industrial structure, but the same high quality level of finished product.Surface of total 15.000 m2 - to whom 7.350 under roof.
Schwäbische Werkzeugmaschinen GmbH (SW) with headquarters in Schramberg-Waldmössingen in the German state of Baden-Württemberg is an expanding manufacturer of internationally successful manufacturing systems.
from Schramberg - Waldmössingen,
HELLER is a global manufacturer of machine tools and production systems for metal-cutting processes.
To use this functionality, you need to be logged in
We'll send you an email containing a direct access link.
You have been logged in.
In order for you to get in touch, we will forward the following information to this provider:
We'll be suggesting suitable topics, exhibitors, articles, program items and further information.