Discover new solutions and input for mechanical engineering, tool manufacturing.
29. March 2021
In 2017, Werkzeugschleiferei Hugo Limmer started a test phase of the Blaser grinding oil Blasogrind GTC 7. The goals were ambitious, but Blasogrind convinced all along the way. With the high-performance grinding oil, Hugo Limmer manufactures more efficiently and saves around 67,000 euros per year.
15. March 2021
This article informs you about the trends, technologies and processes that are driving modern mechanical engineering. And you will learn how you can use new technologies to accelerate product development.
28. October 2020
This year URMA presented its 2020 innovations virtually. Did you miss this virtual launch of the URMA Tools novelties? Don't worry - we have prepared the recording for you.
16. July 2020
Learn in this White Paper how product lifecycle management affects the development and introduction of new products and how critical business processes can be improved.
31. October 2019
Since 1996, OTEC has developed from a mechanical engineering start-up into a global technology leader for deburring, grinding, smoothing and polishing. In an interview, Managing Director Helmut Gegenheimer gives interesting insights into the development history and future of the technology leader.
14. October 2019
OTEC in Switzerland - close, competent and reliable: An experienced German-, Italian- and French-speaking sales team will be available to you as your contact in future.
The contact between the workpieces and the medium generates a very intense finishing effect which is up to 20 times more efficient than can be achieved with systems such as conventional vibrators. Only OTEC has the know-how to finish very fine workpieces.
13. August 2019
The optimization of tool life (and thus costs) was the main objective of tool manufacturer Ifanger AG when the company began its collaboration with Blaser Swisslube in 2017. Following a detailed analysis, the production was changed over to B-Cool—with excellent results.
9. July 2019
Cross bores with almost identical diameters show a very high unevenness. With the new COFA-X technology, it is possible to mechanically remove the burrs completely from these uneven surfaces in an automated process.
8. July 2019
High quality, zero defect production and 100% traceability all while lowering
production cost per part are challenging automotive manufacturers. FOBA
offers high-end laser technology that solves all these demands. On top we offer
customized services covering your entire laser marking needs.
13. May 2019
The multi-channel measurement technology developed by SIGMAtools allows the complete and fast analysis of complex mechatronic systems. Relevant system data can be measured selectively or monitored over time.
10. May 2019
The new service of colouring covers the whole RAL range for laser sintered parts submerged in a water bath. Additionally we present the first VaporFuse Surface part of Switzerland. This surface made by industrial 3D printing can finally compete with injection moulding!
9. May 2019
Your perfect installation ready component thanks broad knowledge and a lot of experience.
hould it be beneficial for you or you don't have the facilities or the capacity, we will assume the overall responsibility fo the delivery of finished drawing parts based on our plate materials.
7. May 2019
Notre thème principal du Prodex de cette année est le monde du travail 4.0 qui sera mis en œuvre sur les trois stands Swissmem, Swissmem Academy et Industry 2025 et dans le Forum.
6. May 2019
The 6-axis robot MAX 150 Professional is a specialist for machining tasks in the milling area. With its accuracy, operating speed and load capacity, the MABI robot is ideally suited to the challenges of CNC and AM applications.
For a fast assembly, customers often require additional small components and accessories. The budget for such hinges, fixes, etc. is limited, but just-in time production leads to time saving, which has a greater value indeed. This showcase shows ready-to install parts of an agriculture machine.
2. May 2019
L'automatisation (ultérieure) des machines-outils permet d'augmenter le nombre d'heures-machines sans avoir besoin de personnel supplémentaire, même avec de petites séries. Nos rapports comprennent la conception et l'étude de faisabilité de la solution ainsi que le calcul des investissements et de l
29. April 2019
Our newly designed high-pressure system SFB-310eco combines the proven FMB loading magazine technology with the innovative and energy-efficient high-pressure technology of SF-Systeme Büchele in a compact unit and sets new standards in operability and application.
Very complicated and precisely defined deburring operations and clearly defined edge rounding are implemented with specially developed brushes. Nothing is impossible.
25. April 2019
The universal cylindrical grinding machine KELLENBERGER 100 is flexibly configurable and replaces five previous machine models. The Fanuc package solution provides suitable control and drive technology for all configurations. This enables Hardinge to meet almost any customer requirement.
24. April 2019
STAMA MT 733 Series; Process stability: the first part produced usable; 6 side / simultaneous 5-axis machining with milling and turning from bar and chuck; With polymer concrete base frame in thermosymmetrical construction with high heat capacity and low thermal conductivity.
23. April 2019
Everything is possible! This is our motto when it comes to developing & producing innovative, customised brushes or driven brushing devices. Challenge us!
17. April 2019
The installation of a Filtermist centrifugal technology mist collector FX4002 for emulsion and oil mist leads to a cleaner, safer and more productive workshop.
In addition to the well knowned belt- and disk skimmer series S, M and D a new serie F has been developped. It is based on a modern design and simplicity.
Discover the limitless possibilities thanks to Additive Manufacturing (3D print) of metal parts in combination with mechanical post processing! All from one single source of experienced specialists.
15. April 2019
As the world's leading supplier of plain bearings, GGB strives to provide its customers with the best solutions. By investing in a digital microscope, the company can optimize its product development and better serve its customers.
Our company works exclusively for third parties, as subcontractor, and we produce precise mechanical parts and components of high quality only based on drawings provided by customers.
The Ultimaker S5 is a professional desktop 3D printer with a large build volume and ideal user-friendliness. The Ultimaker solution wins with the easy-to-use software Ultimaker Cura and standard material profiles which allow for quick realisations from 3D models.
When working on the development of a prototype of the new Mikron 6x6 machine tool, the company opted to use solutions from the Siemens Motion Control Services portfolio for the first time. This enables Mikron to generate a digital twin of the prototype.
You are welcome to visit our booth B17 in hall 1 or our showroom in Allschwil , where we can advise you on your tool applications. Bring in your tools and instruments for sharpening, repair or calibration. You have chosen the right partner.
9. April 2019
The manual zero point clamping system for direct workpiece clamping offers you greatly reduced set-up times, reliable workpiece clamping with maximum holding forces, maximum repeat accuracy and optimum accessibility for 5-sided machining.
4. April 2019
The complete service includes transport, place the machine at the final location, startup of the machine as well as final inspection. On request we also carry out customized training.
4th / 5th axle equipped with Roller Gear, for high precision and rigidity. Available with Heidenhain, Siemens or Fanuc control. Standard with 15'000 rpm, optional 20'000 rpm.
3. April 2019
Increase your productivity with the unique features of a 5-axis machine tool: The UMC-750 is an affordable solution for 3+2 machining and simultaneous 5-axis work, on a platform that is intuitive and easy to use.
1. April 2019
Compact, robust, reliable, these are the characteristics of the BC Cutting Laser. A system with simple operation and reliable technology paired with high-end laser technology is available at an extremely attractive price. Low machine dimensions increase the user’s flexibility.
26. March 2019
The fully automatic band saw KLAEGER pharos220SmartCut has 2 robust linear columns, a 2-axis CNC control with SmartCut software, which optimizes the sawing process. This enables a high saw productivity and precision of the saw cuts with small machine dimensions.
Development, production, assembly, training and service: at FEHLMANN, you will receive everything from a single source.
After delivery and a practice-oriented start-up, the customer will not be left to his own devices.
21. March 2019
The TH Roller Guide is an engineering element for machine building, apparatus, tool and fixture construction.
A complete linear guide is made up of the guide bush, column and the matching roller cage from aluminium,
bronze or plastic.
20. March 2019
The EROWA Robot Compact 80 is currently the best-selling
EROWA handling unit. Now it also offers the ability to load blanks directly into the manufacturing machine.
18. March 2019
In recent years, the demand for machines with MMS systems for the lubrication of tools in the machining area has developed. The solution of DropsA ensures continuous lubrication of the workpiece and makes working with band saws more efficient, resulting in increased productivity and reduced costs.
11. March 2019
Wir sind Hersteller von Spannzangenfutter in verschiedenen Ausführungen von Standard bis zu kompletten Sonderspannzangenfutter. Durch unser Produkteportfolio unserer Lieferanten, der Eigenprodukte und der eigenen Fertigung, sind wir in der Lage Komplettlösungen anzubieten.
8. March 2019
Spot facing at the edge of the hole pose a challenge due to poorly accessible areas or limited machining space. Find out how Starrag AG was able to solve this problem and thus increase both its efficiency and process reliability.
4. March 2019
New protective SCHMIDT® SmartGate with automatic doors:
- compatible with all SCHMIDT presses
- protecting the operater
- safety distances optimized
- cycle time optimized
28. February 2019
The improvement of the production process, increasing the the tool life, the improvement of the working environment and the reduction of the working times and production costs, are the advantages coming by MiQueL using.
The dry injector blasting installation 75 IN sets new standards in manual processing of workpieces in combination with its novel design and its proven blasting system.
26. February 2019
Flexible, dynamic pickup, processing, and depositing. These are the core topics for this automated laser processing system. In addition to the laser, the heart of the system is a compact six-axis robot with about the same length and range as a human arm.
18. February 2019
SIM Automation GmbH was looking for a tool management system that would enable the integration of a wide variety of machines and software manufacturers. Find out how the company was able to achieve six-figure savings with the new system.
With a small but proven product portfolio, we offer our customers individual and economical solutions. Our all-round service includes the transport, unloading and delivery of the machine to the site as well as flawless commissioning with the most modern equipment.
14. February 2019
Smart, intelligent and networkable: With the new FEATURE grip product range, KIPP offers smart components and solutions that deliver information, can be networked and so are suitable for Industry 4.0. They help make digitised manufacturing processes more stable, precise and reliable.
H2O GmbH will celebrate its 20th anniversary in 2019. Coinciding with the start of this anniversary year, the company is presenting a new system: the VACUDEST XS Clearcat.
13. February 2019
The company Fankhauser Engineering AG knows how important highly flexible machines with long running times are in order to be able to produce profitably. The use of MFC milling cutters enables significant savings in purchasing, tool preparation, machine setup and tool costs.
Multifunctional high-performance milling MFC. Multifunctionality as a key factor in simplifying the entire manufacturing process. Now with MB-RNVDS extension.
Industrial tool reconditioning with performance guarantee. FRAISA ReTool® is our efficient,
all-round service for the industrial reconditioning of your FRAISA and third-party tools.
8. February 2019
BSF allows back spotfacing up 2.3 times the bore diameter. It enables the machining of spot facings and counterbores without reclamping of the work piece.
With the latest CNC turning and milling technology, we manufacture technical plastic components from single part up to serial production. Our polytechnicians are specialized in mastering complex components.
Meet the customer's needs regarding the rapid supply of strategic spare parts for the ordinary and extraordinary maintenance of their automatic machine lines.
7. February 2019
A customer was looking for bar feeders and air filter systems for its machine tools that would guarantee maximum productivity while taking up as little space as possible. Find out how the solution of LNS Europe met these criteria and how at the same time the production layout could be optimized.
LNS ChipBlaster JV-40, the ideal high-pressure coolant solution, designed with variable flows and pressures, to deliver clean filtered coolant for maximum machining productivity.
5. February 2019
With the OnlineEngineer you can select and configure the suitable TSUBAKI KABELSCHLEPP energy chain for your application in just a few steps. As a registered user, you have access to all functionalities. But you can also configure energy chains with a guest login.
MASTER LE60/LE80. Quiet and weight-optimized cable carrier with new divider system TS3. Space saving, versatile inner distribution with very fast opening. Width optimized and ready for Industry 4.0.
The new DURO-A RC power chuck delivers as a true PRICE-PERFORMANCE CHAMPION across the board. With the quick jaw change system and individual unlocking, the jaws can be changed, moved or turned flexibly and with less set-up time in just 50 SECONDS.
"FH-Cast" is a process for the production of moulds on a laboratory scale using 3D-printed, meltable plastic positives. The aim is to be able to produce moulds with a high degree of geometric freedom and low personnel and infrastructure costs.
4. February 2019
A machine builder needed plastic parts with specific criteria for the construction of the interior of a machine. Learn how Acryline supported its customers with know-how, starting with the choice of suitable materials, prototype production up to the production of the series.
31. January 2019
Additive manufacturing allows for the direct conversion of design construction files into fully functional objects. Many methods of additive manufacturing require subsequent heat treatment of the manufactured components.
29. January 2019
OTEC machines allow the quality of carbide tools to be improved considerably. The special procedure enables the chip grooves of carbide cutters and drill bits, for example, to be polished to a high gloss.
24. January 2019
Tooling Steel with hardening HRC 55-60, hard metal welding,assembly according to the drawings, jigs function test , send your drawings and get quote soon.
Bélet tools are made to last. Most tools can be reconditioned, either if manufactured by Bélet or by our competitors. Profiled tools with constant or logarithmic relief can also be reconditioned on our specialized machines.
23. January 2019
Bronze, brass, aluminum foundry by shell molding and centrifugal casting. Mechanical processing up to 2.000 mm diameter. UNI EN ISO 9001:2015 certified.
Bronze, brass, aluminum mechanical parts according to the customer drawing. Both serial production and little batches. UNI EN ISO 9001:2015 certified.
21. January 2019
The SF1 ILS is the new standard in automated precision finishing. It's the compact OTEC base model for tool processing with automatic loading. All these features make the SF1 ILS an extraordinarily effective and flexible machine. Ideal for processing small batch sizes and frequently changing series.
16. January 2019
Six sharply ground cutting edges mounted tangentially on the milling body ensure excellent tool life and process reliability. This increases productivity and improves the quality of the workpiece.
10. January 2019
Chemical etching is the perfect technique for fast prototyping and high volume production of metal parts. This method allows production with no expensive tools and delivery of no longer than 3 weeks.
For tube machining on a special lathe, no standard ISO tools could take over the task. Read how Denitool developed a special tool that allows the machine to process two tube ends simultaneously.
SynTool is adapted for standard holders. Achieve around 70% cost savings per edge compared to monobloc inserts. For applications which are not possible with standard monobloc turning inserts, we offer HM-shank inserts for Denitool® inserts.
3. January 2019
Weiss AG stands for innovative and productivity-increasing Diamond and CBN tools. With the M-Dresser you can dress diamond and CBN grinding wheels very easily and quickly.
20. December 2018
Whether in your workshop, in the industrial hall or directly on your construction site in the Alps - our control service is on the road for you throughout Switzerland.
31. October 2018
HEICO-LOCK® Wedge Locking System: Wedge Lock Washers // Ring Lock Washers // Wedge Lock Nut // Wheel Nut // HLK-Washers // Combi-Washers - HEICO-TEC® Tensioning System: Tension Nut // Reaction Nut
The HEICO group's in-house testing laboratory provides professional support in the development of new and innovative products for bolted connections.
The decision is taken: The trade fair and symposium for professional 3D printing will take place from 14 to 15 September 2021 in the halls of Messe Luzern.
Tuesday, 14. September 2021
- Wednesday, 15. September 2021
Since 1936, Blaser Swisslube has stood for lubricant solutions that offer measurable added value and are gentle to people and the environment.
Siemens Digital Industries Software is driving transformation to enable a digital enterprise where engineering, manufacturing and electronics design meet tomorrow. The Xcelerator portfolio helps companies of all sizes create and leverage digital twins that provide organizations with new insights.
URMA is supplier of 3D-metal printing machines and CNC-Machinetools for metal machining. URMA is exclusive partner for Switzerland for SLM Solutions and Haas CNC-Machine tools. URMA is also a Swiss manufacturer of high-performance tools for precise hole making.
OTEC is a medium-sized manufacturer of drag finishing, disc finishing and stream finishing machines. Founded by Helmut Gegenheimer in 1996, the company has become market leader by developing innovative new machine concepts and numerous patented processes.
What ultimately counts is your bottom line. Front and back bore machining of bore edges in one single pass without having to turn the workpiece will enable you to reduce your production times and to increase the process capability at the same time.
Consulting / Sales / Service of Alltec GmbH - FOBA laser marking machines, Photon Energy - Ultra short pulse laser, OWIS - Optical beam guidance and positioning systems manual and motorized, ISEL - CNC machines, Automation, aluminum profiles,
SIGMAtools offers connectivity, IoT solutions as well as individual measurement and monitoring solutions. SIGMAtools - Your partner for IT in mechanical engineering.
layer by layer to your part; selective laser sintering of small batch series and prototypes.
from Rümlang ZH,
Precision in steel and aluminium
Swissmem met en réseau les entreprises, favorise de bonnes conditions économiques et fournit à ses membres des conseils juridiques complets sans frais supplémentaires. Nous formons la relève et vos employés de manière plus approfondie.
MABI Robotic AG is a young and very innovative Swiss company that has built up a large portfolio of high-precision and intelligent robot systems in the field of robotics and automation technology in recent years.
Lampa Plastic is operating in Thermoforming sector since 1971Recently acquired by a new managing group of entrepreneursRenewed Industrial structure, but the same high quality level of finished product.Surface of total 15.000 m2 - to whom 7.350 under roof.
Intool est un fournisseur de solutions innovantes pour la fabrication industrielle, la technologie d'assemblage et l'automatisation. Avec les produits et services que nous livrons et fournissons, nous aidons nos clients à augmenter leur productivité et à assurer la qualité de leurs produits.
High-pressure units, filtration- and wet chip removal units.
Our brush systems clean, transport, structure, grind, dose, polish, label, carry, guide or fix - the possibilities are endless. And every day our around 30 employees find new brush solutions. Challenge us!
With over 60 years experience in the development of CNC technologies, more than 22.5 million installed products and over 6000 employees worldwide, FANUC is one of the worlds leading manufacturers of factory automation, industrial robots, CNC systems and machinery.
Stama Swiss GmbH offers advice and support in manufacturing with machining centres and mill-turn centres for every industry, right up to turnkey solutions. With Stama Swiss GmbH you get an economical and future-oriented solution for your production.
Your partner for filtration, protection + tooling. Since 1963.
Limitless possibilities thanks to Additive Manufacturing in combination with mechanical post processing!
KEYENCE is a worldwide leader in the development and manufacture of sensing equipment ranging from automation sensors, measuring instruments, and visions systems to laser markers and digital microscopes. We invite you to visit our stand.
Our company has been on the market since 1977 with the production of hydraulic and oil-hydraulic parts, like blocks, fittings, flanges, bushings, nuts, hoses, pressing bushes, ring fittings, spacers, bolts, valves, caps, hubs and fittings of all kind using materials of various alloys.
DIM3NSIONS is your partner for the successful start with in-house 3D printing. With professional 3D printers from Ultimaker and Formlabs as well as a wide portfolio of accessories and materials and customized trainings, our customers are in good hands.
from Aesch ZH,
Digitalization is deeply and permanently changing the manufacturing process. With our unique and comprehensive portfolio of digitalization products, we guide you on your way to digitalization.
SISO-Mecanis LTD is a reliable partner for your manufacturing problems, providing competent modern solutions with our production systems based on precision tools, machine tools and measuring systems for your quality control and services.
FN Niederhauser AG was founded by Fritz Niederhauser at the end of November 1989. The machine tool park was successively adapted to customer requirements and conti¬nuously renewed. On 1 January 2015, FN Niederhauser AG was taken over by a long-standing employee, Roland Helfenstein.
Official Swiss representative of 3D printers from 3D-Systems. Specialized in the field of additive manufacturing with printer technologies such as DMP, SLS, DLP, MJP and CJP, as well as authorized Distributor and General Representative of Machine Tools by TTGroup & Indùstrias ROMI S.A..
Baublys Laser GmbH develops, produces and sells systems and systems for laser marking and laser engaving as well as laser cutting systems. For more than 45 years, Baublys name has been for continuous pioneering work in the development of new industry standards.
Fehlmann AG develops and manufactures precision machine tools for drilling and milling purposes. Since its founding in 1930, the company has supplied over 12000 machines worldwide. Development, production and assembly are carried out exclusively at the works in Seon, Switzerland.
Precision machining, manufacturing machining and assembly. Turning, milling, grinding, honing parts. Laser marking
Since 1946 Dropsa has been producing centralized lubrication systems and components developing many ideas and products that have shaped our industry.Today our innovation is ever present showcasing new products and technology to the global market.
SCHMIDT® Presses stand for first-class assembly technology worldwide. This applies both for stand-alone machines and for assembly modules integrated in complex automation lines.
Since over 35 years Sandmaster AG is specialized in mastering demanding sandblasting processes and implement those processes into qualitative outstanding and reliable machines.
Consulting and sales of industrial production solutions. Cleaning-degreasing, laser marking and engraving, CNC Turning and milling, high speed cutting, centerless grinding and project management. For over 45 years at your service.
ZOLLER is the expert for more economic production. ZOLLER combines presetting, measuring and inspection machines with software and automation solutions for the efficient presetting, measuring, inspecting and managing of cutting tools.
from ST. GALLEN,
Osterwalder Werkzeugmaschinen AG was founded in 1954 and is today one of the leading Swiss suppliers of CNC - automatic lathes from Hanwha, machining centres from YCM and large parts machining centres from FPT.
KIPP is a manufacturer of clamping tools, standard elements and operating parts. We offer a comprehensive range of products with more than 36,000 items. TRUST IN KIPP
from Liestal BL,
H2O GmbH nowadays forms part of the worldwide most experienced experts in the sustainable treatment and recirculation of industrial wastewater. With its efficient and safe VACUDEST vacuum distillation systems they achieve wastewater-free production for customers in more than 50 countries worldwide.
State-of-the-art technology, inventiveness and customer focus. Three factors that have made FRAISA a success on the world market for cutting tools.«passion for precision» is a commitment and a key note: Welcome to FRAISA!
Acryline AG specializes in manufacturing plastic components. We supply our customers with customized precision parts: technical milling and drilling parts, machine covers, protective covers for exhibitions, advertising signs, lamp covers and diffusers, displays, digital and screen printing.
DICO NET consists of independent companies characterized by complementary highly advanced skills that have decided to work together in a network to provide a complete service, from the design to the entire construction of automatic machines, including the required wiring and computer services.
from ozzano dell'emilia,
LNS, your One-Stop-Shop for machine-tool peripherals.
Your partner for Kabelschlpp-products and machine equipment in Switzerland and the Principality of Liechtenstein
Founded in 1909, RÖHM is now one of the leading chucking tool manufacturers with a wide and powerful product range.
We support companies and institutions in their innovation projects. Our employees generate knowledge and solutions for practical applications.
Nabertherm with 500 employees worldwide have been developing and producing industrial furnaces for many different applications in the thermal process technology for 70 years. As a manufacturer, Nabertherm offers the wide and deep range of furnaces worldwide.
GPM has 16 years in precision CNC machining services , focus on precise tolerance to 0.01mm-0.005mm. Customer define GPM as a turn-ket role of precision parts SUPERMARKET for all machining technical include milling , turning, grinding, wire cut, assembly... GPM SWISS quality with competitive price.
Since 1948, Louis BELET SA, a family business of about 100 employees has manufactured cutting tools in solid carbide or PCD. Our creative, technically, ecologically and socially performing has become a benchmark in the manufacture of profiled tools.
Specializing in bronze, brass and aluminum casting as well as high-precision mechanical processing.
Technology across borders. Four generations of innovation and passion have made ALESA the company it is today. Our family business has stood for first-class tools since 1934. ALESA stands for high-quality tools in terms of machining performance and life span, which makes for long-term relationships.
Lasertech Chemical Machining Group was the first Italian group to develop the process of photo chemical milling (PCM).PCM is a high technology process which basically consist of controlled removal of metal particles through solutions for the production of metal parts
from Cernusco sul Naviglio,
We are a successful company in the manufacturing industry. At Denitool, cutting tools are developed and manufactured. The product portfolio includes milling cutters, boring bars, indexable inserts and system tools.
Hebetech AG is an established family-owned company active in the fields of lifting technology, load securing and work safety. Our customers are medium-sized companies, large industrial companies and construction companies from all over Switzerland.
A STRONG GROUP BEHIND A STRONG PRODUCT
To use this functionality, you need to be logged in
We'll send you an email containing a direct access link.
You have been logged in.
In order for you to get in touch, we will forward the following information to this provider:
We'll be suggesting suitable topics, exhibitors, articles, program items and further information.