The requirements for quality, process reliability and traceability are constantly increasing, especially in highly regulated industries. They are also important prerequisites for digitizing production. Discover here solutions around these topics.
13. April 2021
No pain, no gain? That's something for the gym.With "RX small", the smallest replaceable insert reaming system in the world, you will have less pain and more...
22. October 2020
Metal sheet laser cutting machine generally has sharp supporting strips in the worktable area. Plates can be scratched in the process of feeding, which can result in the cut product work piece that needs to be treated twice before reaching the finished product standard. How can this be solved?
28. September 2020
The importance of the media selection in any surface finishing process cannot be emphasized enough. These consumables are essential “precision tools” for achieving the specified results. Selecting the right media is a complex task. That’s why you should consult an expert such as Rosler for guidance.
13. November 2019
Laser-cut parts are used in many industries (e.g. automotive, electrical and optical industries, jewellery). After production, one question always arises: How can the thin parts be deburred and polished uniformly without changing the geometry?
14. October 2019
The contact between the workpieces and the medium generates a very intense finishing effect which is up to 20 times more efficient than can be achieved with systems such as conventional vibrators. Only OTEC has the know-how to finish very fine workpieces.
8. October 2019
As the technology leader in the field of mass finishing machines, OTEC develops and manufactures innovative machine concepts for perfect surface finishing.
10. September 2019
The top priority of any joint implant is to restore mobility and ensure longevity. Ralf Merz, a specialist for precision parts, relies on the vertical 5-axis machining center VM-2 from Haas to meet this demand.
8. July 2019
High quality, zero defect production and 100% traceability all while lowering
production cost per part are challenging automotive manufacturers. FOBA
offers high-end laser technology that solves all these demands. On top we offer
customized services covering your entire laser marking needs.
2. July 2019
GAES, a manufacturer of hearing aids, is always working to make them smaller, more discreet and more powerful. By investing in a VF-2SS CNC machining centre from HAAS, he can speed up the machining of complex precision parts and ensure more consistent quality.
7. May 2019
innotool austria UNILOCK 5-Axis Stabilizer is especially developed for supporting work pieces during their operating process. As an addition to existing manual or zero-point oriented work holding systems the UNILOCK 5-Axis Stabilizer provides a solid stop against vibrations.
3. May 2019
As a provider of customer-specific complete solutions, we have developed a customer-specific application which enables efficient spring testing, in addition to our standard range of Mark-10 measuring instruments.
29. April 2019
The mobile and stationary dust extractors from ESTA are true all-rounders. They ensure clean, dust-free air at the workplace. The dust extractors are suitable for almost every type of dust and industry. The dust extractors are low-maintenance, their compact design makes them versatile and flexible.
15. April 2019
Regardless of which surface you want to measure, the confocal 3D laser scanning microscope of the VK-X series allows you to perform a precise and large-scale surface analysis.
As the world's leading supplier of plain bearings, GGB strives to provide its customers with the best solutions. By investing in a digital microscope, the company can optimize its product development and better serve its customers.
You are welcome to visit our booth B17 in hall 1 or our showroom in Allschwil , where we can advise you on your tool applications. Bring in your tools and instruments for sharpening, repair or calibration. You have chosen the right partner.
9. April 2019
The manual zero point clamping system for direct workpiece clamping offers you greatly reduced set-up times, reliable workpiece clamping with maximum holding forces, maximum repeat accuracy and optimum accessibility for 5-sided machining.
The VHS120 is the ideal vacuum cleaner for the metal industry when there is need of high performances in compact dimensions for collecting any type of waste material.
With the smallest digital fine boring head EWE 04-7, also known as "EWE Downsize", BIG KAISER, a global market leader for high-quality precision tools and systems for the metalworking industry, is a major player in the field of micromachining.
8. April 2019
FOBA provides marking solutions to make components traceable throughout the entire production process. This means a significant improvement in product quality and process reliability.
26. March 2019
Laser measuring system for CNC machine tools that is unique worldwide for non-contact tool measurement and tool monitoring under the harshest conditions. Unbeatably fast, precise and reliable thanks to the latest DIGILOG technology, premium laser optics and perfected BLUM protection system.
25. March 2019
Medartis AG is a global manufacturer in the field of medical technology. After changing over to Blaser’s B-Cool 755 metalworking fluid, the company was finally able to increase the life of the tools and to solve the foaming issue of the metalworking fluid.
18. March 2019
The CUBE evo is characterized by continuous programmability. In addition, the positions of the finishers can be approached extremely precisely. All processing parameters can be saved and retrieved quickly.
Calibration of length and torque, calipers, micrometers, thread gauges, gauge blocks, elbows, gauges and test pins, gauge rings, torque wrenches and screwdrivers, torque testers and load cells
14. March 2019
The calibration laboratory DKD-DAkkS D-K-15032-02 of Taylor Hobson in Weiterstadt - traceability of your calibration standards for roughness and roundness.
A brand new inspection concept combining roughness, roundness and contour on a fully automated inspection system, reducing the number of inspection operations. Developed specifically to cope with the rigorous demands of high volume production, yet still flexible enough to be used in batch inspection
5. March 2019
Fast air release for optimal cooling with Blasogrind GTC 7. The peak performance grinding oil with performance-optimized formulation for high feed rate, long dressing intervals and excellent surface quality.
4. March 2019
New protective SCHMIDT® SmartGate with automatic doors:
- compatible with all SCHMIDT presses
- protecting the operater
- safety distances optimized
- cycle time optimized
28. February 2019
The dry injector blasting installation 75 IN sets new standards in manual processing of workpieces in combination with its novel design and its proven blasting system.
“While developing our products could be possible without the HandySCAN 3D, we’ve gained so much time, accuracy, flexibility, and efficiency since using the solution throughout the product design and engineering phase.” — Bertrand Didier, SCOTT Sports.
The HandySCAN 3D offers increased accuracy and resolution. It is the most versatile 3D scanner on the market for inspection and demanding reverse engineering.
27. February 2019
Micro-precision machining, extremely small, ultra-precise. The high level of expertise that Gühring possesses in the manufacture of tools and grinding quality enables us to also satisfy these requirements in micro-precision machining applications.
18. February 2019
A manufacturer in the medical sector had high demands on the thread quality for its products. DC Swiss offered him a solution with maximum process reliability and a radius correction of only 0.03, as well as a resource-efficient service life of 2500 pieces.
12. February 2019
As first threading specialist ever DC SWISS offer an overall solution for the quality assurance of micro threads: Limit plug gauges, limit ring gauges and master gauges for measuring machines with SCS certificate - everything from a single source.
6. February 2019
Production of the watch plate brings to birth a craft-produced ‘calibre’ – this is the watchmaker’s term for the centrepiece of an ultra-precise, mechanical luxury watch. IWC Schaffhausen uses a KERN Micro for the operation, to guarantee a high standard of process reliability and repetition accuracy
29. January 2019
OTEC machines allow the quality of carbide tools to be improved considerably. The special procedure enables the chip grooves of carbide cutters and drill bits, for example, to be polished to a high gloss.
GPM is since 16 years Swiss quality manufacturer for precision machining, tolerance can reach 0,005 mm, complete machining technical. Send us your drawings and we will make you an offer.
25. January 2019
DISA has a own, from the SAS accredited labor (SCS 0083), for force- and torque devices ( until 1000Nm/1000N). We also calibrate some bigger load cells like PAT-Meter, Hirschmann, Krüger etc.
24. January 2019
The ESM303 is a test bench for tensile and compression force tests up to 1.5 kN. With its robust design it is very well suited for laboratory and production applications.
Quality safety with ESM1500 from Mark-10 for to use as a fully automatic calibration test stand for strain gauge sensors used at DISA Elektro AG. A complete customized system includ voltage gauge and software application.
21. January 2019
Discover why Franke Industrie AG, a worldwide player in the aerospace and power generation industry, ditched shrink-fit and switched to powRgrip to increase profitability.
15. January 2019
The labelling of medical devices presents manufacturers with challenges: Requirements are increasing and regulations are becoming stricter. As a manufacturer of laser marking equipment and marking solutions, we develop reliable solutions to ensure your process reliability.
3. January 2019
The cutting edges are extremely sharp and precise due to the laser cutting process. Attaching chip grooves or chip breakers by laser increases the service life of the tool and process reliability.
17. December 2018
High-performance bandsaw machine for separating components made of materials that are easy to difficult to machine from their base plate using an additive manufacturing process.
20. November 2018
Machining simple or complex precision parts — whether 5-axis with positioning or 5-axis simultaneous milling, the FEHLMANN VERSA 645 linear masters any demanding complex task with flying colours — accurately and reliably.
15. November 2018
The Instant Measurement System improves your quality and inspection process thanks to its rapidity, precision, automatic data recording, and ultra wide stage to measure larger target.
URMA is supplier of 3D-metal printing machines and CNC-Machinetools for metal machining. URMA is exclusive partner for Switzerland for SLM Solutions and Haas CNC-Machine tools. URMA is also a Swiss manufacturer of high-performance tools for precise hole making.
HSG is a national high-tech enterprise who is dedicated to provid laser intelligent equipment solutions to customers all over the world. We focus on the field of laser intelligent equipment manufacturing with the concept of efficient, intelligent, environmental and compatible product development.
The Rösler Group has been the experts in the field of surface finishing for more than 80 years and offers the most extensive portfolio in the world of mass finishing systems, shot blasting, consumables and services. Renowned companies from a wide range of industrial sectors trust in Rösler products.
OTEC is a medium-sized manufacturer of drag finishing, disc finishing and stream finishing machines. Founded by Helmut Gegenheimer in 1996, the company has become market leader by developing innovative new machine concepts and numerous patented processes.
Consulting / Sales / Service of Alltec GmbH - FOBA laser marking machines, Photon Energy - Ultra short pulse laser, OWIS - Optical beam guidance and positioning systems manual and motorized, ISEL - CNC machines, Automation, aluminum profiles,
DISA Elektro Ltd. offers you solutions in force and torque measurements. Specific software solutions are a part of our business. We also have a calibration office whitch is accredited from the SAS (SCS0083). We offers you calibrations until 1000Nm/1000N.
Helfina is your contact for solutions in your production. Whether oil smoke, oil mist extraction from Absolent, chip conveyance and recycling, automation up to complete turnkey solutions. Helfina AG is your contact. We are looking forward to your challenge.
KEYENCE is a worldwide leader in the development and manufacture of sensing equipment ranging from automation sensors, measuring instruments, and visions systems to laser markers and digital microscopes. We invite you to visit our stand.
SISO-Mecanis LTD is a reliable partner for your manufacturing problems, providing competent modern solutions with our production systems based on precision tools, machine tools and measuring systems for your quality control and services.
FN Niederhauser AG was founded by Fritz Niederhauser at the end of November 1989. The machine tool park was successively adapted to customer requirements and conti¬nuously renewed. On 1 January 2015, FN Niederhauser AG was taken over by a long-standing employee, Roland Helfenstein.
Nilfisk is a leading global provider of professional cleaning products and services.
A Different Kind of Tooling Partner - Our mission is to find the best of the best and deliver it to our customers with a personal commitment to helping them install truly efficient solutions. We have exceptionally high standards for the products we represent.
Blum-Novotest – a global leader in technology and innovation in measuring and testing technology. A reliable partner to the global machine tool, automotive and aerospace industries
Since 1936, Blaser Swisslube has stood for lubricant solutions that offer measurable added value and are gentle to people and the environment.
Thielenhaus Superfinish Innovation offers you access to the entire product range of finishing technology: Finishing systems, finishing tools and the associated advisory expertise that all come from a single source are the best foundation for process reliability in your company.
Calibration laboratory SCS0030 for length and torque
Taylor Hobson is an ultra-precision technology company operating at the highest levels of accuracy within the field of surface, roundness and form metrology, providing contact and non-contact measurement solutions for the most demanding applications.
from 1 Weiterstadt,
SCHMIDT® Presses stand for first-class assembly technology worldwide. This applies both for stand-alone machines and for assembly modules integrated in complex automation lines.
Since over 35 years Sandmaster AG is specialized in mastering demanding sandblasting processes and implement those processes into qualitative outstanding and reliable machines.
Creaform is a world-class leader in 3D measurement technology as well as 3D engineering services.
Seit 1990 steht Gühring (Schweiz) AG für massgeschneiderte Schweizer Werkzeuglösungen. Mit 80 Mitarbeitern fertigt und vertreibt Gühring in der Schweiz Präzisionswerkzeuge für die Metallzerspanung. Immer nah am Kunden. Ständig wachsend.Traditionsreich. Innovativ. Regional.
DC SWISS SA is the partner for threading technology for companies of all sizes, at home and abroad. We produce tools ranging from dia. 2.74 mm - 160 mm. Our subsidiary DC NANO TOOLS SA is your partner for dia. 0.3 mm - 2.74 mm.
Founded in 1909, RÖHM is now one of the leading chucking tool manufacturers with a wide and powerful product range.
GPM has 16 years in precision CNC machining services , focus on precise tolerance to 0.01mm-0.005mm. Customer define GPM as a turn-ket role of precision parts SUPERMARKET for all machining technical include milling , turning, grinding, wire cut, assembly... GPM SWISS quality with competitive price.
Visionary innovations in toolholding since 1950. Our holistic toolholding systems excel with extraordinary reliability, high precision and outstanding quality.
In 2016 KASTO SChweiz AG, based in Rheinfelden, Germany, was founded as another subsidiary of KASTO Maschinenbau, DE. We are proud of the satisfaction of our customers and of the countless sawing machines and storage systems, which are installed nationwide at various customers.
Fehlmann AG develops and manufactures precision machine tools for drilling and milling purposes. Since its founding in 1930, the company has supplied over 12000 machines worldwide. Development, production and assembly are carried out exclusively at the works in Seon, Switzerland.
To use this functionality, you need to be logged in
We'll send you an email containing a direct access link.
You have been logged in.
In order for you to get in touch, we will forward the following information to this provider:
We'll be suggesting suitable topics, exhibitors, articles, program items and further information.