HEULE Werkzeug AG

Short description

What ultimately counts is your bottom line. Front and back bore machining of bore edges in one single pass without having to turn the workpiece will enable you to reduce your production times and to increase the process capability at the same time.

Posts (6)

HEULE Werkzeug AG July 9, 2019
Video

Deburring of 1:1 Cross bores with COFA-X

Cross bores with almost identical diameters show a very high unevenness. With the new COFA-X technology, it is possible to mechanically remove the burrs completely from these uneven surfaces in an automated process.

HEULE Werkzeug AG March 19, 2019
Showcase

Front and Back Deburring in One Single Pass

A fork piece has four bore edges. Two of them are difficult to access. This report shows how the deburring of all 4 edges can be done in an efficient and process capable way and without requiring to reclamp the workpiece.

HEULE Werkzeug AG March 8, 2019
Showcase

Increased efficiency by unmanned back spot facing

Spot facing at the edge of the hole pose a challenge due to poorly accessible areas or limited machining space. Find out how Starrag AG was able to solve this problem and thus increase both its efficiency and process reliability.

HEULE Werkzeug AG February 8, 2019
Product Highlight

SNAP - The Economic Chamfering Tool

Economic front and back chamfering in one operation, with very easy blade changes. Removes burrs radially without requiring the work piece to be turned.

HEULE Werkzeug AG February 8, 2019
Product Highlight

BSF - The Competitive Back Spotfacing Tool

BSF allows back spotfacing up 2.3 times the bore diameter. It enables the machining of spot facings and counterbores without reclamping of the work piece.

HEULE Werkzeug AG February 8, 2019
Product Highlight

COFA - The Universal Deburring Tool

Consistent deburring of even and uneven bore edges, front and back in one single pass. Both bore edges will be machined without requiring the work piece to be turned. For efficient and process capable high volume production.

Standards, Products, Services

  • P Drilling
  • P Bore finishing
  • S Consulting

About us

Our strength lies in problem solving.

Our innovations revolve exclusively around back bore machining. Since 1961, when HEULE Werkzeug AG was initially set up as a contract manufacturing business, our goal has been to reduce production times. Therefore, we developed tools that can front and back deburr, chamfer and countersink in ONE OPERATION and without turning the workpiece. Today, HEULE achieves 50% of its sales turnover with tools developed to suit individual customer requirements.

HEULE continues its global presence and excellent customer service with its subsidiary offices in the United States, China, Korea and Germany. Our experienced distribution partners offer competent technical support to you locally. This is why  HEULE Werkzeug AG is the first choice for many world leading manufacturers seeking solutions for back bore machining.