Efficient and cost-effective production

Cost pressure in manufacturing continues to increase. Therefore, new solutions are needed to manufacture components and products cost-effectively and efficiently.

Posts - that's to be discovered on the topic (48)

Blaser Swisslube AG March 29, 2021
Showcase

Grinding oil increases quality & efficiency

In 2017, Werkzeugschleiferei Hugo Limmer started a test phase of the Blaser grinding oil Blasogrind GTC 7. The goals were ambitious, but Blasogrind convinced all along the way. With the high-performance grinding oil, Hugo Limmer manufactures more efficiently and saves around 67,000 euros per year.

teltec systems ag December 17, 2020
Service Highlight

FOBA Lease – Get the best laser marking equipment

With our FOBA Lease Program you'll benefit from more planning security and financial flexibility. Check our attractive leasing offers for our complete product range, from laser marking rails to turn-key laser marking machines with vision.

PRODEX 2019

OPEN MIND Technologies Schweiz GmbH September 2, 2020
Video

Testimonial: Western Precision Products about hyperMILL

For their aerospace applications, Western Precision Products must simultaneously achieve tight tolerances and high part quality while having low-volume production. Tyler Bureau, director of manufacturing technology, explains why hyperMILL is critical for success in their new prototype department.

Blaser Swisslube AG August 17, 2020
Video

Bacteria in metalworking fluids

Control them instead of fighting them – Learn from our microbiologists how to control the bacteria in your coolant and how you can even use them with our Bio-Concept.

Blaser Swisslube AG June 29, 2020
Showcase

Reduce tool wear by more than 20% with metalworking fluid

AMI Industries, a precision manufacturer in Tainan, Taiwan, set ambitious targets for the use of Blaser Swisslube metalworking fluids for its new machining centre. With the holistic approach of Blaser Swisslube and a change to the metalworking fluid B-Cool 755, all these goals were achieved.

Blaser Swisslube AG June 15, 2020
Video

Coolant monitoring insights from Blaser Swisslube laboratory

This webinar shows you how important it is to monitor and maintain your metalworking fluid regularly. You will learn how you can do this yourself and how our Liquid Tool experts can support you on site. Your hosts are Manuel Schlaeppi and Etienne Jeanquartier from our customer service.

Blaser Swisslube AG November 11, 2019
Product Highlight

Everything clean: Machines, workpieces and emulsion

B-Cool MC 610 is ideal for general machining with a significant share of copper-base alloys. Clean machines, stable processes stand out. Excellent filterability even with cast iron.

Blaser Swisslube AG August 13, 2019
Showcase

Sixfold increase of tool life with the right coolant

The optimization of tool life (and thus costs) was the main objective of tool manufacturer Ifanger AG when the company began its collaboration with Blaser Swisslube in 2017. Following a detailed analysis, the production was changed over to B-Cool—with excellent results.

PRODEX 2019

HABA AG May 9, 2019
Service Highlight

Drawing parts / Complete processing

Your perfect installation ready component thanks broad knowledge and a lot of experience. hould it be beneficial for you or you don't have the facilities or the capacity, we will assume the overall responsibility fo the delivery of finished drawing parts based on our plate materials.

SWISSTECH 2019

Harter GmbH May 7, 2019
Product Highlight

Drymex® - Dryer for Sludges

With Drymex® sludge dryers you reduce your disposal costs by up to 60%. Government sponsored drying technology with heat pump – reliable, uniform and low-energy drying in a closed system.

SWISSTECH 2019

Providers (30)