Medical technology

Posts - that's to be discovered on the topic (14)

URMA AG October 8, 2019

SLM for the production of patient-matched titanium implants

At the Swiss Medtech Expo Philip Oris, SLS Solutions, addressed the technical development of the selective laser melting technology. By doing so, he demonstrated how SLM enables the fabrication of patient-friendly titanium implants. URMA is the exclusive partner in Switzerland for SLM Solutions.

URMA AG September 10, 2019

Unsurpassed price-performance ratio

The top priority of any joint implant is to restore mobility and ensure longevity. Ralf Merz, a specialist for precision parts, relies on the vertical 5-axis machining center VM-2 from Haas to meet this demand.


URMA AG July 2, 2019

Tailor-made hearing aids thanks to VF-2SS from HAAS

GAES, a manufacturer of hearing aids, is always working to make them smaller, more discreet and more powerful. By investing in a VF-2SS CNC machining centre from HAAS, he can speed up the machining of complex precision parts and ensure more consistent quality.

teltec systems ag May 3, 2019

UDI labelling obligation for dental products

For our customer, a manufacturer of reusable dental instruments, direct marking becomes mandatory. Find out what competitive advantages the customer was able to achieve with teltec systems' permanent laser marking.


HAKAMA AG April 24, 2019

Access to smaller quality laboratories with high standards

The bioreactor required a housing that would withstand all loads while meeting the requirements of the industrial designers in detail. The compact device developed for beginners and professionals has created the access to smaller high-end quality laboratories.


Tornos SA April 23, 2019
Product Highlight

The new SwissNano 7

The ergonomics and exclusive design of the SwissNano are now available in a new dimension. With a 7 mm bar capacity, the SwissNano 7 retains the 4 mm version’s advantages, such as the kinematics and the excellent thermal stability that ensured the success of the 4 mm version.


Mess-Technik Blatter AG April 2, 2019
Service Highlight


Calibration of length and torque, calipers, micrometers, thread gauges, gauge blocks, elbows, gauges and test pins, gauge rings, torque wrenches and screwdrivers, torque testers and load cells.


Blaser Swisslube AG March 25, 2019

Boost productivity with the Liquid Tool

Medartis AG is a global manufacturer in the field of medical technology. After changing over to Blaser’s B-Cool 755 metalworking fluid, the company was finally able to increase the life of the tools and to solve the foaming issue of the metalworking fluid.


Blaser Swisslube AG March 6, 2019

Long-term plant-based solution

Mollet Präzisionsmechanik AG, a family business working in the field of precision mechanics and medical technology, had an issue with the metalworking fluid. Approaching Blaser Swisslube was the beginning of a new chapter.


Blaser Swisslube AG March 5, 2019

Complete process optimization with Blaser Swisslube

More than just a coolant supplier – for its customer Laubscher Präzision AG, Blaser Swisslube reproduced and optimized the entire production process in its in-house technology center. The results are convincing: a reduced cycle time of over 16% and an extended tool life of about 15%.


Providers (9)