13. April 2021
No pain, no gain? That's something for the gym.With "RX small", the smallest replaceable insert reaming system in the world, you will have less pain and more...
29. March 2021
In 2017, Werkzeugschleiferei Hugo Limmer started a test phase of the Blaser grinding oil Blasogrind GTC 7. The goals were ambitious, but Blasogrind convinced all along the way. With the high-performance grinding oil, Hugo Limmer manufactures more efficiently and saves around 67,000 euros per year.
15. March 2021
This article informs you about the trends, technologies and processes that are driving modern mechanical engineering. And you will learn how you can use new technologies to accelerate product development.
13. January 2021
Which is the right IIoT platform for my company? What are the advantages and disadvantages of a homegrown and a pre-built industrial IoT platform? Learn to understand the strengths and weaknesses of both approaches.
17. December 2020
With our FOBA Lease Program you'll benefit from more planning security and financial flexibility. Check our attractive leasing offers for our complete product range, from laser marking rails to turn-key laser marking machines with vision.
28. October 2020
This year URMA presented its 2020 innovations virtually. Did you miss this virtual launch of the URMA Tools novelties? Don't worry - we have prepared the recording for you.
22. October 2020
Metal sheet laser cutting machine generally has sharp supporting strips in the worktable area. Plates can be scratched in the process of feeding, which can result in the cut product work piece that needs to be treated twice before reaching the finished product standard. How can this be solved?
28. September 2020
The importance of the media selection in any surface finishing process cannot be emphasized enough. These consumables are essential “precision tools” for achieving the specified results. Selecting the right media is a complex task. That’s why you should consult an expert such as Rosler for guidance.
2. September 2020
For their aerospace applications, Western Precision Products must simultaneously achieve tight tolerances and high part quality while having low-volume production. Tyler Bureau, director of manufacturing technology, explains why hyperMILL is critical for success in their new prototype department.
1. September 2020
HEICO-LOCK® wedge locking systems secure your bolted connections effectively and sustainably against self-loosening - especially under vibration and dynamic loads
31. August 2020
At special machine manufacturer Endutec, a UR10e is responsible for feeding a CNC machine. The robot supports the company in utilizing its machines to full capacity by taking over the night shift, delivering flexibility and space saving benefits.
26. August 2020
The watch industry has high demands on the drying of small parts. The top priority here is freedom from stains. Harter GmbH developed a 5-chamber dryer with manual operation on customer request. You can find out more about the built-in rotary mechanisms, airflow and temperatures here.
17. August 2020
Control them instead of fighting them – Learn from our microbiologists how to control the bacteria in your coolant and how you can even use them with our Bio-Concept.
16. July 2020
Learn in this White Paper how product lifecycle management affects the development and introduction of new products and how critical business processes can be improved.
29. June 2020
AMI Industries, a precision manufacturer in Tainan, Taiwan, set ambitious targets for the use of Blaser Swisslube metalworking fluids for its new machining centre. With the holistic approach of Blaser Swisslube and a change to the metalworking fluid B-Cool 755, all these goals were achieved.
15. June 2020
This webinar shows you how important it is to monitor and maintain your metalworking fluid regularly. You will learn how you can do this yourself and how our Liquid Tool experts can support you on site. Your hosts are Manuel Schlaeppi and Etienne Jeanquartier from our customer service.
13. November 2019
Laser-cut parts are used in many industries (e.g. automotive, electrical and optical industries, jewellery). After production, one question always arises: How can the thin parts be deburred and polished uniformly without changing the geometry?
11. November 2019
B-Cool MC 610 is ideal for general machining with a signiﬁcant share of copper-base alloys. Clean machines, stable processes stand out. Excellent ﬁlterability even with cast iron.
31. October 2019
Since 1996, OTEC has developed from a mechanical engineering start-up into a global technology leader for deburring, grinding, smoothing and polishing. In an interview, Managing Director Helmut Gegenheimer gives interesting insights into the development history and future of the technology leader.
14. October 2019
OTEC in Switzerland - close, competent and reliable: An experienced German-, Italian- and French-speaking sales team will be available to you as your contact in future.
The contact between the workpieces and the medium generates a very intense finishing effect which is up to 20 times more efficient than can be achieved with systems such as conventional vibrators. Only OTEC has the know-how to finish very fine workpieces.
8. October 2019
As the technology leader in the field of mass finishing machines, OTEC develops and manufactures innovative machine concepts for perfect surface finishing.
At the Swiss Medtech Expo Philip Oris, SLS Solutions, addressed the technical development of the selective laser melting technology. By doing so, he demonstrated how SLM enables the fabrication of patient-friendly titanium implants. URMA is the exclusive partner in Switzerland for SLM Solutions.
10. September 2019
The top priority of any joint implant is to restore mobility and ensure longevity. Ralf Merz, a specialist for precision parts, relies on the vertical 5-axis machining center VM-2 from Haas to meet this demand.
13. August 2019
The optimization of tool life (and thus costs) was the main objective of tool manufacturer Ifanger AG when the company began its collaboration with Blaser Swisslube in 2017. Following a detailed analysis, the production was changed over to B-Cool—with excellent results.
9. July 2019
Cross bores with almost identical diameters show a very high unevenness. With the new COFA-X technology, it is possible to mechanically remove the burrs completely from these uneven surfaces in an automated process.
8. July 2019
High quality, zero defect production and 100% traceability all while lowering
production cost per part are challenging automotive manufacturers. FOBA
offers high-end laser technology that solves all these demands. On top we offer
customized services covering your entire laser marking needs.
2. July 2019
GAES, a manufacturer of hearing aids, is always working to make them smaller, more discreet and more powerful. By investing in a VF-2SS CNC machining centre from HAAS, he can speed up the machining of complex precision parts and ensure more consistent quality.
6. June 2019
Laurent Simon, Visiativ Suisse SA, talks at PRODEX about the value of a digital twin. He explains how the digital twin model supports your decisions before starting any activities by the means of Optimization, Anticipation and Innovation.
16. May 2019
Nominated for the PRODEX Award 2019: Precise combination of hardware and software for cutting tools. The ArCut X was developed by Fraisa as a conical circular arc milling cutter in close cooperation with CAM manufacturer Openmind.
13. May 2019
UMATI - the standard interface based on OPC/UA represents bidirectional communication on production systems and machines. Data can be read and written on the basis of a defined information model. We help you with the implementation.
The multi-channel measurement technology developed by SIGMAtools allows the complete and fast analysis of complex mechatronic systems. Relevant system data can be measured selectively or monitored over time.
Recognize the connections in your infrastructure - what happens when and why? With a complete analysis, indications for the optimal use, dimensioning and parameterization of your systems can be define
10. May 2019
The new service of colouring covers the whole RAL range for laser sintered parts submerged in a water bath. Additionally we present the first VaporFuse Surface part of Switzerland. This surface made by industrial 3D printing can finally compete with injection moulding!
Take your customers on a fascinating journey!
Walk through your virtual high-tech industrial facility before the
project starts, feel the space of a planned building, or allow your
customers to experience your future innovations today. VR Experience
can be installed as a fi xed structure or used as
The high-quality Twist double castor offers you the following advantages: - practical brake - attractive appearance, configurable according to your requirements (colour, company logo, brakes etc.) - assembly with standard tools - smooth running with minimum play - simple cleaning
9. May 2019
Your perfect installation ready component thanks broad knowledge and a lot of experience.
hould it be beneficial for you or you don't have the facilities or the capacity, we will assume the overall responsibility fo the delivery of finished drawing parts based on our plate materials.
7. May 2019
innotool austria UNILOCK 5-Axis Stabilizer is especially developed for supporting work pieces during their operating process. As an addition to existing manual or zero-point oriented work holding systems the UNILOCK 5-Axis Stabilizer provides a solid stop against vibrations.
Notre thème principal du Prodex de cette année est le monde du travail 4.0 qui sera mis en œuvre sur les trois stands Swissmem, Swissmem Academy et Industry 2025 et dans le Forum.
With Drymex® sludge dryers you reduce your disposal costs by up to 60%. Government sponsored drying technology with heat pump – reliable, uniform and low-energy drying in a closed system.
6. May 2019
From the textile industry to wood processing, acrylic glass processing to advertising industry. The CO2 flatbed laser is an all-rounder that also scores with its compact size.
PRODEX and SWISSTECH are extended into the digital world with Memtec.plus. Memtec.plus is the new digital meeting place for the MEM industry, where visitors and exhibitors get in contact 365 days a year. Visit us at the trade fair and find out more.
The 6-axis robot MAX 150 Professional is a specialist for machining tasks in the milling area. With its accuracy, operating speed and load capacity, the MABI robot is ideally suited to the challenges of CNC and AM applications.
The AM Guide contains an annual update on the topic of additive manufacturing and inspires the Swiss AM community with concrete showcases for different uses.
For a fast assembly, customers often require additional small components and accessories. The budget for such hinges, fixes, etc. is limited, but just-in time production leads to time saving, which has a greater value indeed. This showcase shows ready-to install parts of an agriculture machine.
3. May 2019
The new twin wheel castor from the successful LINEA range is now also available for use in the industrial sector. Testimony from leading automobile manufacturers, the LINEA for industry is another quality product from TENTE.
As a provider of customer-specific complete solutions, we have developed a customer-specific application which enables efficient spring testing, in addition to our standard range of Mark-10 measuring instruments.
For our customer, a manufacturer of reusable dental instruments, direct marking becomes mandatory. Find out what competitive advantages the customer was able to achieve with teltec systems' permanent laser marking.
2. May 2019
From the mechanical engineering industry to plumbing, electrical installations and the construction industry. The galvo fiber laser is a must in countless areas.
Disposable head for skin injection, PLastic product (polycarbonate) with cne summits and very small holes. Height and diameter cone: 150 micron. Width of the holes: 60 micron. Tolerance: +/- 5 micron. Products must be absolutely free of burrs.
L'automatisation (ultérieure) des machines-outils permet d'augmenter le nombre d'heures-machines sans avoir besoin de personnel supplémentaire, même avec de petites séries. Nos rapports comprennent la conception et l'étude de faisabilité de la solution ainsi que le calcul des investissements et de l
Ultimaker Cura is one of the most powerful print preparation software packages for 3D printers and offers a quick access for new users as well as a huge optimizing potential for advanced users. Get to know Cura even better with a special DIM3NSIONS training.
High-quality tools, jigs, and fixtures, manufactured on on multiple Ultimaker 3D printers, save Volkswagen Autoeuropa an estimated 325'000 Euro per year.
This program is part of the “Smart Industry” line of the Hightech Systems & Materials program of the province of Noord Brabant, which has been drafted by companies, knowledge institutes, educators and sector associations in close cooperation with the province of Noord Brabant, Brainport Industries.
30. April 2019
Additive manufacturing offers completely new possibilities in the design of parts. Thanks to hollow structures, material can be saved. But can the part endure permanent stress? Yes! ProtoShape proves this with a mountain bike part made of titanium.
29. April 2019
With interdisciplinary know-how, state-of-the-art technology and highly motivated experts, we assist national and international companies with the industrialisation of complex commodities.
Our newly designed high-pressure system SFB-310eco combines the proven FMB loading magazine technology with the innovative and energy-efficient high-pressure technology of SF-Systeme Büchele in a compact unit and sets new standards in operability and application.
Very complicated and precisely defined deburring operations and clearly defined edge rounding are implemented with specially developed brushes. Nothing is impossible.
For a special application of our customer we searched for a brush solution that is both - food grade and electrically conductive. There is the right brush for every application.
The mobile and stationary dust extractors from ESTA are true all-rounders. They ensure clean, dust-free air at the workplace. The dust extractors are suitable for almost every type of dust and industry. The dust extractors are low-maintenance, their compact design makes them versatile and flexible.
25. April 2019
At MartinSystems, the many years of experience and proven concepts of the innovative special machine manufacturer MartinMechanic are combined to form a clever standard automation concept.
FANUC Intelligent Edge Link & Drive system, the open platform connects various devices across manufacturers for analysis and improvement of your production data.
The universal cylindrical grinding machine KELLENBERGER 100 is flexibly configurable and replaces five previous machine models. The Fanuc package solution provides suitable control and drive technology for all configurations. This enables Hardinge to meet almost any customer requirement.
At PRODEX, FANUC will present for the first time in Switzerland, the SR-6iA, the 6 kg version of the new Scara series. Only last year, FANUC presented the SR-3iA, the first model of the new robot series.
24. April 2019
STAMA MT 733 Series; Process stability: the first part produced usable; 6 side / simultaneous 5-axis machining with milling and turning from bar and chuck; With polymer concrete base frame in thermosymmetrical construction with high heat capacity and low thermal conductivity.
The bioreactor required a housing that would withstand all loads while meeting the requirements of the industrial designers in detail. The compact device developed for beginners and professionals has created the access to smaller high-end quality laboratories.
23. April 2019
The ergonomics and exclusive design of the SwissNano are now available in a new dimension. With a 7 mm bar capacity, the SwissNano 7 retains the 4 mm version’s advantages, such as the kinematics and the excellent thermal stability that ensured the success of the 4 mm version.
Everything is possible! This is our motto when it comes to developing & producing innovative, customised brushes or driven brushing devices. Challenge us!
At the Brainport Industries Campus in the Dutch town of Eindhoven the most innovative and successful companies and institutions from the high-tech industry in the Brainport region gather under one roof.
The new SIT NEXT® high performance V-belts made of EPDM compound allows to reduce the overall dimensions of the transmission, guaranteeing high efficiency and energy optimization. They are antistatic according to ISO 1813 and comply with Reach and RohS regulations.
For our customers from medical technology and chip industry we assemble finished kits in our ESD-protected assembly area. As long-standing specialists in the production of precise mechanical parts, we are committed to the highest quality.
As long-standing specialists in the production of precise, mechanical parts, we are committed to the highest quality. We manufacture, advise and develop together with our customers from various industries, such as medical technology, chip industry and vacuum technology.
The production of the first aluminium model airplane is running and the first parts of it can already be seen. The replacement of the well-tried balsa structure with aluminium leads to many advantages: robust construction which guarantees damage-free landing as well as resistant surfaces.
We produce precise gears in the modules 0.25 to 1. As specialists of many years in the production of precise mechanical parts, the highest quality is very important to us.
Fieldlab ‘The Smart Connected Supplier Network’: One language for all data. In the day-to-day business of the supplier industry countless data are gathered such as orders, plans, technical drawings and bills that need to be exchanged between different parties.
17. April 2019
The installation of a Filtermist centrifugal technology mist collector FX4002 for emulsion and oil mist leads to a cleaner, safer and more productive workshop.
In addition to the well knowned belt- and disk skimmer series S, M and D a new serie F has been developped. It is based on a modern design and simplicity.
Discover the limitless possibilities thanks to Additive Manufacturing (3D print) of metal parts in combination with mechanical post processing! All from one single source of experienced specialists.
As an alternative to expansion or renewal of existing plant, it is possible to apply multi-level optimization techniques capable of correcting inefficiencies due to the gap between the complexity of transport system and the simplicity of control logics, with incredible economic savings.
We are a Taiwan Manufacturer of Custom Metal Parts and our services include the following: Die Casting, Machining, Coating/Anodizing, Lox Wax Casting, Machining, Laser, Heat Treat as well as Surface Treat.
The assembled parts are made multiple process like the below: 1. Extrusion Profile 2. CNC turning and milling 3. Surtech 650 4. Black Anodising 5. Assembly
With the Internet of things, objects come to life. They acquire the ability to communicate data with other objects and with humans. The data, stored in the Cloud, becomes information that allows you to control and manage advanced processes and services.
16. April 2019
We collect and filter the exhaust air from industrial processes. We separate aerosols efficiently, what remains is pure air. In this way you protect your health and the environment and save money at the same time. We guarantee maintenance-free operation of our filter systems for 1 year.
ATOS 5 was developed for industrial use and delivers high-precision data in a short measuring time, even under harsh conditions. The full-surface 3D measurement data enables comprehensive process and quality control by visualizing hidden errors.
We offer services including Casting, like die casting, lost wax casting, Extrusion; and CNC machining, like milling, turning, 4 Axis and 4+1 Axis; as well as surface treatment.
C. Otto Gehrckens, shortly named COG, is a independant manufacturer of precision O-rings and elastomer seals. We are distinguished by high delivery capability, flexible production and a deeply embedded orientation to the customer at all levels.
The use of plastics in the medical world is not uncommon. On the contrary, the use of plastics within the medical industry has only increased. Developments in this industry have been very rapid in the past years.
15. April 2019
At BKB Precision, we work with a variety of plastics when manufacturing your manifolds, including high performance and technical plastics. BKB Precision will discuss the many possibilities open to you and help you determine the feasibility of your plastic manifold(s).
We offer professional advice to solve application problems that may arise when using plastics as components in machinery or other industrial applications.
BKB Precision gladly realises composites (assy’s) or sub-composites for you. Compositing, packaging and testing products is an important part of our manufacturing process. BKB Precision strives to relieve you from your burdens and our added value in plastic assembly often benefits efficiency.
Regardless of which surface you want to measure, the confocal 3D laser scanning microscope of the VK-X series allows you to perform a precise and large-scale surface analysis.
As the world's leading supplier of plain bearings, GGB strives to provide its customers with the best solutions. By investing in a digital microscope, the company can optimize its product development and better serve its customers.
Our company works exclusively for third parties, as subcontractor, and we produce precise mechanical parts and components of high quality only based on drawings provided by customers.
The Ultimaker S5 is a professional desktop 3D printer with a large build volume and ideal user-friendliness. The Ultimaker solution wins with the easy-to-use software Ultimaker Cura and standard material profiles which allow for quick realisations from 3D models.
When working on the development of a prototype of the new Mikron 6x6 machine tool, the company opted to use solutions from the Siemens Motion Control Services portfolio for the first time. This enables Mikron to generate a digital twin of the prototype.
You are welcome to visit our booth B17 in hall 1 or our showroom in Allschwil , where we can advise you on your tool applications. Bring in your tools and instruments for sharpening, repair or calibration. You have chosen the right partner.
11. April 2019
Turmocomp HD 150 is a lubricant compound for the lubrication of roller bearings in complex operating conditions. It ensures maintenance-free roller bearings with extended service life - even under critical operating conditions.
10. April 2019
SINUMERIK 840D sl is considered to be the standard in the premium class CNCs, which is certainly justified. Maximum CNC performance, along with a high degree of flexibility and openness – which has been unachievable up until now – represent the basis for almost every machine concept.
Take a moment to remember your last stay at a hotel. You were sure to have encountered a service trolley piled with towels and bedding as you walked along the corridors. Weight: up to 150 kg. A load that presents a challenge for service people, but need do so no longer, thanks to the TENTE e-drive.
Digitalization is one of the major challenges facing industrial production today. We’re there as a skilled partner to assist our customers on their path to digitalization. Our digital services create new opportunities to achieve lasting improvements in productivity.
9. April 2019
The manual zero point clamping system for direct workpiece clamping offers you greatly reduced set-up times, reliable workpiece clamping with maximum holding forces, maximum repeat accuracy and optimum accessibility for 5-sided machining.
TENTE has been developing smart mobility solutions since 1923. Solutions which noticeably improve people’s lives and their working environment. Solutions which increase productivity, ensure more safety and open up new horizons in matters of design, durability as well as environmental friendliness.
The TENTE e-drive drive system enables you to move heavy loads conveniently and efficiently. The ideal e-drive system for industrial applications can be installed on any transport trolley - even at a later date.
The VHS120 is the ideal vacuum cleaner for the metal industry when there is need of high performances in compact dimensions for collecting any type of waste material.
With the smallest digital fine boring head EWE 04-7, also known as "EWE Downsize", BIG KAISER, a global market leader for high-quality precision tools and systems for the metalworking industry, is a major player in the field of micromachining.
8. April 2019
We develop and deal with each project from the beginning until the end. By doing so, we manage each productive process in-house and offer you the comfort of having just one single point of contact. Working together, we find the best solutions with a convincing price-quality ratio.
Because we are passionate about precision mechanical processing and attention to detail. We are precise, flexible, innovative and highly specialised, and we know how to turn your ideas into reality, on time. “Innovation, flexibility and quality”: this is our motto.
FOBA provides marking solutions to make components traceable throughout the entire production process. This means a significant improvement in product quality and process reliability.
4. April 2019
The complete service includes transport, place the machine at the final location, startup of the machine as well as final inspection. On request we also carry out customized training.
4th / 5th axle equipped with Roller Gear, for high precision and rigidity. Available with Heidenhain, Siemens or Fanuc control. Standard with 15'000 rpm, optional 20'000 rpm.
Lead-free materials are required by Reach, RoHs and laws. If the lead content is reduced or eliminated, then you need other tools. g + p has already carried out two major tool development projects and developed special tools.
In short: the higher the quality of the final product has to be, the more sense it makes to use our process. The quality of the final product is significantly improved by incorporating individual parts manufactured with the use of this technology. Our customers have confirmed this.
3. April 2019
Through its subsidiaries, Schmelzer offers its customers pipe and industrial assembly and industrial furnace assembly.Assembling of high-quality capital goods is a responsible role.
We have been producing furnace systems of the highest precision for many years. We offer products from the stage of detailed design to complete assembly of the construction including gas and water supply - a one-stop service.
In the electrostatic precipitator sector we can make our latest Know-how available to you. We provide you with Engineering,construction and manufacture Services,extending through to Installation.
Not only standard items, but also custom parts made of rubber manufactured according to customers’ specific needs. They are concrete examples of the long-lasting experience of Tecnica Gasket.
The modular boring and toolsystem (0.2 - 2’400 mm) exists with two different connections: axial threaded connection (alpha-modul) and side lock system (beta-modul)
Ideal for medium to high volume metal part production and prototypes, the next generation SLM®280 2.0 Selective Laser Melting System offers a 280 x 280 x 365 mm build envelope.
Increase your productivity with the unique features of a 5-axis machine tool: The UMC-750 is an affordable solution for 3+2 machining and simultaneous 5-axis work, on a platform that is intuitive and easy to use.
2. April 2019
Nominated for the PRODEX Award 19: The EWE Downsize - the world's smallest digital fine boring head and flagship product for industry 4.0.
BIG KAISER is a major player in the field of micromachining.
You don't want to waste any time? Let us know your requirements during a customer visit or by means of a sketch via e-mail. Together we can define a specification. In recent years we have advised several hundred companies. We are happy to share our experience with you.
Calibration of length and torque, calipers, micrometers, thread gauges, gauge blocks, elbows, gauges and test pins, gauge rings, torque wrenches and screwdrivers, torque testers and load cells.
From the problem / objective to the turn-key solution, for the competitiveness of products, processes and plants: Adgenera is the partner for Innovation.
1. April 2019
Ifanger MicroTurn range and our Knurling tools have been designed and standardized over the year in a system that can be used on almost all the available precision machines.
Compact, robust, reliable, these are the characteristics of the BC Cutting Laser. A system with simple operation and reliable technology paired with high-end laser technology is available at an extremely attractive price. Low machine dimensions increase the user’s flexibility.
Do you require complex milled parts and 5-axis parts? Challenge us: Structured processes and close cooperation with customers ensure our quality. We constantly strive to achieve the highest Quality Standards.
CNC turning centres with up to 12 axes and 36 driven tools. Highly complex parts can be manufactured in one production process to leave the machine as a finished part.
Within a few days from the CAD-model to real injection molded parts. Prototypes made from production grade materials. Economical production of small-batch injection molding runs. All with the help of additive manufactured injection molding tools and the agile production process of Injex.
The component combines the strengths of additive manufacturing with the traditional post processing. Thin wall thickness, freedom of design, precise guides, highest surface quality and a marketable price in quantities of 500-1000 pcs/year.
28. March 2019
A vision system was developed to improve the productivity of distribution centres and enable accurate sorting of parcels. Solutions were examined that could be functionally and aesthetically integrated into the company's industrial system.
Trotec develops the fastest laser engraving machines on the market. Time is money - time per laser job is crucial for your business success. The Speedy 400 is designed for ease of use, productivity and flexibility.
26. March 2019
The fully automatic band saw KLAEGER pharos220SmartCut has 2 robust linear columns, a 2-axis CNC control with SmartCut software, which optimizes the sawing process. This enables a high saw productivity and precision of the saw cuts with small machine dimensions.
Laser measuring system for CNC machine tools that is unique worldwide for non-contact tool measurement and tool monitoring under the harshest conditions. Unbeatably fast, precise and reliable thanks to the latest DIGILOG technology, premium laser optics and perfected BLUM protection system.
Development, production, assembly, training and service: at FEHLMANN, you will receive everything from a single source.
After delivery and a practice-oriented start-up, the customer will not be left to his own devices.
Ultrasonic-assisted cleaning is a very effective and gentle method of cleaning all types of materials intensively in the shortest possible time without damage. Industrial cleaning in particular, which requires several ultrasonic frequencies, is a domain of KKS Ultraschall AG.
This system concept is the ideal solution for cleaning small parts with complicated shapes. The compact single-chamber cleaning system with KKS ultrasonic technology offers maximum flexibility in a minimum of space and guarantees problem-free and reproducible fine cleaning.
25. March 2019
Medartis AG is a global manufacturer in the field of medical technology. After changing over to Blaser’s B-Cool 755 metalworking fluid, the company was finally able to increase the life of the tools and to solve the foaming issue of the metalworking fluid.
21. March 2019
Milltech manufactures highly complex Milled and Turned Components according to customer's drawings performing the entire cycle: from technical design to the requested mechanical parts, through prototyping and manufacturing to the finished product.
Installed in just a few steps: the matte black housing for the control unit and welding unit is available in a luxury and a low-budget version. According to the customer's request
The TH Roller Guide is an engineering element for machine building, apparatus, tool and fixture construction.
A complete linear guide is made up of the guide bush, column and the matching roller cage from aluminium,
bronze or plastic.
20. March 2019
The EROWA Robot Compact 80 is currently the best-selling
EROWA handling unit. Now it also offers the ability to load blanks directly into the manufacturing machine.
When the Fehlmann Versa 825 was purchased, future automation had already been considered. An EROWA Robot Dynamic 150 Linear now operates the Fehlmann 5-axis milling center at Helfenstein AG. The system is space-saving and the integration of the robot took place without any problems.
19. March 2019
A fork piece has four bore edges. Two of them are difficult to access. This report shows how the deburring of all 4 edges can be done in an efficient and process capable way and without requiring to reclamp the workpiece.
18. March 2019
A good product always comes with the right services. Only these can lead to a solution that will leave customers completely satisfied. Blaser Swisslube is there to support its customers at any time by offering the know-how they need— be it with a visit, a consultation or a training.
The CUBE evo is characterized by continuous programmability. In addition, the positions of the finishers can be approached extremely precisely. All processing parameters can be saved and retrieved quickly.
In recent years, the demand for machines with MMS systems for the lubrication of tools in the machining area has developed. The solution of DropsA ensures continuous lubrication of the workpiece and makes working with band saws more efficient, resulting in increased productivity and reduced costs.
Calibration of length and torque, calipers, micrometers, thread gauges, gauge blocks, elbows, gauges and test pins, gauge rings, torque wrenches and screwdrivers, torque testers and load cells
We introduce the new product line ROBOTmaster from SUHNER MACHINING. These tools can be used for grinding, deburing, weld removal and milling operations.
14. March 2019
The clever sheet metal modules for clothing, bags,mobile phone charging stations and information screens accommodate a wide range of indoor and outdoor applications.
Fiber disc with geometrically shaped ceramic abrasive grain. Defines itself in a defined way and creates always new sharp edges. Your advantage: Processing of more workpieces in the same time (up to 30% more removal compared to previous leading ceramic abrasives)
The EVTM-55-L is a compact briquetting machine that combines all components in one housing. Briquetting increases the economic value of chips/sanding sludge and reduces chip and sludge handling time.
The name Messer is inseparably linked to broaching tools. We design, manufacture and sharpen broaching tools for internal gears, grooves and many other geometries.
We offer a comprehensive all-round care in everything you need in Puncto rooms. From contract broaching, broaching tool construction, delivery of complete components, broaching machine trade, purchase and sale of used tools and machines to the training of your employees in the area of broaching.
The calibration laboratory DKD-DAkkS D-K-15032-02 of Taylor Hobson in Weiterstadt - traceability of your calibration standards for roughness and roundness.
A brand new inspection concept combining roughness, roundness and contour on a fully automated inspection system, reducing the number of inspection operations. Developed specifically to cope with the rigorous demands of high volume production, yet still flexible enough to be used in batch inspection
Praline creations – irresistible temptation. An exquisite selection of finest truffles and praline creations awaits you. Every one is made by hand with passion and great attention to detail.
The classic. The unique pleasure experience of the Original Basler Läckerli is due to their jealously guarded recipe that has remained unchanged since 1904.
11. March 2019
NEXTAGE frees people from simple, repetitive activities. This allows them to focus on tasks that demand more creativity and generate higher added value, such as process management and optimization.
This table-top charger is particularly suitable for round, hexagonal and octagonal rods, punctures, screwdriver blades, motor shafts, tap and stone drill blanks, carbide rods, glass tubes, rod-shaped parts and much more.
Wir sind Hersteller von Spannzangenfutter in verschiedenen Ausführungen von Standard bis zu kompletten Sonderspannzangenfutter. Durch unser Produkteportfolio unserer Lieferanten, der Eigenprodukte und der eigenen Fertigung, sind wir in der Lage Komplettlösungen anzubieten.
Unsere neuste Entwicklung sind Spannzangenfutter mit Hubeinstellung. Mit den Futtertypen FNO-K, FNP-KAH und FNF-KAH können dünnwandige oder formschlüssige Werkstücke, wie Ringe, Scheiben, Hülsen, usw. durch die mechanische Hubeinstellung deformationsfrei und prozesssicher gespannt werden.
8. March 2019
As a leading global provider of surface coatings, Oerlikon Balzers relies on industrial air cleaning systems from Zehnder to reduce its quality costs, improve the health and wellbeing of its employees, and enhance the visual impact of its coating centres.
Spot facing at the edge of the hole pose a challenge due to poorly accessible areas or limited machining space. Find out how Starrag AG was able to solve this problem and thus increase both its efficiency and process reliability.
6. March 2019
With increasing depth, large forces act on the tubes of a geothermal probe. In order to be able to cope with these forces at the lowest point over decades, Jansen relies on additive reinforcing sleeves and saves 70% of the original production costs.
Mollet Präzisionsmechanik AG, a family business working in the field of precision mechanics and medical technology, had an issue with the metalworking fluid. Approaching Blaser Swisslube was the beginning of a new chapter.
The air cleaning systems of Zehnder Clean Air solutions considerably reduce any kinds of solid airborne particles, such as dust, micro organisms and fumes, oil and mist.
Taylor Hobson has launched its new Form Talysurf® PGI NOVUS, powered by Metrology 4.0 software. It is the most-advanced system available for surface, contour, 3D and diameter measurement.
5. March 2019
Vasco 6000 is an ester-oil-based metalworking fluid with a high proportion of additives and was specially developed for the demanding conditions of general machining.
Fast air release for optimal cooling with Blasogrind GTC 7. The peak performance grinding oil with performance-optimized formulation for high feed rate, long dressing intervals and excellent surface quality.
Blasogrind GTS 15 offers a higher feed performance. The extended grinding burn limit allows for higher feed rates and thus an increased material removal rate.
"Synergy 735 looks like water and is my clear choice", explains Influencer and owner of Titans of CNC Academy, Titan Gilroy. Neutral odor and excellent skin compatibility of the full-synthetic product convince.
More than just a coolant supplier – for its customer Laubscher Präzision AG, Blaser Swisslube reproduced and optimized the entire production process in its in-house technology center. The results are convincing: a reduced cycle time of over 16% and an extended tool life of about 15%.
4. March 2019
The UrbanAlps StealthKey is the mechanical answer to the unauthorized simple 3D scanning and 3D printing of mechanical keys. The high security keys are produced by laser melting.
Götti Dimension X allows a complete new individualisation. The system: a front, 3 sizes, 3 nose bridges and custom-made temples. The result: perfect wearing comfort thanks to eyesglasses with identity.
In order to establish a more flexible supply chain and shorter time to market, KUK Electronic AC produces a part of its bobbin series with selective laser sintering.
New protective SCHMIDT® SmartGate with automatic doors:
- compatible with all SCHMIDT presses
- protecting the operater
- safety distances optimized
- cycle time optimized
28. February 2019
Chemical etching and laser cutting are the most advanced techniques for prototyping and manufacturing metal parts. Being able to offer both technologies under one roof offers great advantages to potential customers.
The improvement of the production process, increasing the the tool life, the improvement of the working environment and the reduction of the working times and production costs, are the advantages coming by MiQueL using.
Precision parts and assembly, tolerance 0.008mm, aluminium parts and hard anodized, stainless steel parts, plastic processing, assembly, function test. Send us a drawing and request a quotation.
Högg Profilen opens up many new possibilities for you. Regardless of the material, we supply you with precise profiles that are individually adapted to your needs. With dimensional tolerances in the micrometer range, we manufacture profiles in all metallic materials.
The dry injector blasting installation 75 IN sets new standards in manual processing of workpieces in combination with its novel design and its proven blasting system.
Buser Oberflächentechnik AG is a leading supplier of complex coating systems. In addition to a broad range of knowledge, our specialty is the flexibility to coat individual parts and to be able to think our way into complex tasks.
Creaform's know-how and reliability in metrology services, reverse engineering or quality control is unmatched. Training and integration of our technologies are tailored to customers' needs.
“While developing our products could be possible without the HandySCAN 3D, we’ve gained so much time, accuracy, flexibility, and efficiency since using the solution throughout the product design and engineering phase.” — Bertrand Didier, SCOTT Sports.
The HandySCAN 3D offers increased accuracy and resolution. It is the most versatile 3D scanner on the market for inspection and demanding reverse engineering.
27. February 2019
Micro-precision machining, extremely small, ultra-precise. The high level of expertise that Gühring possesses in the manufacture of tools and grinding quality enables us to also satisfy these requirements in micro-precision machining applications.
26. February 2019
Flexible, dynamic pickup, processing, and depositing. These are the core topics for this automated laser processing system. In addition to the laser, the heart of the system is a compact six-axis robot with about the same length and range as a human arm.
20. February 2019
We are producers and sellers of rotary unions. A fully provided warehouse allows us to satisfy the most urgent customer’s requests on all our standard production letting us to be considerated as a kind of rotating unions supermarket. Many applications and sellers all around the world.
Platinum resistance thermocouples made of thinfilm high-performance alumina and/or zirconia substates. With a smooth surfaces and a high level of purity they guarantee a reliable performance in use from -50 to + 600 ° C. Designs as SMD or chip soldered / clamped.
Many pride themselves with tool management. But who can offer you perfect integration into your overall process? Data consistency from the CAM system through to the machine? With real tool data or downloaded from the cloud, ready for programming? ZOLLER can.
19. February 2019
The WEICON Adhesive Finder
At www.adhesive-finder.com you can quickly and easily find the right adhesive for your own application. The adhesive finder is available in 21 different language versions.
18. February 2019
GÜHRING networks the production hall. Traditional production is undergoing radical change: Industry 4.0 is to combine industrial production with communication and information technology, thereby contributing to increased productivity and flexibility.
The “Y-AXIS” tool-holders have been developed for machining on a 90° offset position and for a better chip-control with long clamping materials. Tool-holders with and without integrated coolant supply available.
Since wire-electro discharge machining (WEDM) involves a discharge on a wire, it is, in principle, possible to detect the location of the discharge in real time when measuring the machining current pulses from two sides of the workpiece (wire input, wire output).
SIM Automation GmbH was looking for a tool management system that would enable the integration of a wide variety of machines and software manufacturers. Find out how the company was able to achieve six-figure savings with the new system.
AB Foundry, a company specializing in the casting of aluminium parts. From the beggining to the finishing, we can offer you an efficient solution for your aluminium needs.
Drilling stainless steel - fast, reliable and precise. The example of a steam valve for coffee machines shows what is possible if the right tools are available.
CrazyDrill Cool SST-Inox is a carbide drill developped for stainless steels and superalloys, with integrated coolant ducts, abvailable from diameter 1 mm, Drilling depths up to 40 x d can be reched in one single step - no pecking.
With a small but proven product portfolio, we offer our customers individual and economical solutions. Our all-round service includes the transport, unloading and delivery of the machine to the site as well as flawless commissioning with the most modern equipment.
A manufacturer in the medical sector had high demands on the thread quality for its products. DC Swiss offered him a solution with maximum process reliability and a radius correction of only 0.03, as well as a resource-efficient service life of 2500 pieces.
14. February 2019
APM Technica AG is expanding its competence centre for surface coatings with a parylene coatings centre. Parylene ideally fits into the APM portfolio of plasma technology, wet coatings and optical vacuum coatings.
The ALTEF® treatment can significantly improve the properties of aluminum. In many cases, the improvements make it possible to replace steel and other metallic materials.
Smart, intelligent and networkable: With the new FEATURE grip product range, KIPP offers smart components and solutions that deliver information, can be networked and so are suitable for Industry 4.0. They help make digitised manufacturing processes more stable, precise and reliable.
ADR had been working on a new ecological and electric mobility product. BCYCLUP is an ADR-INNOVATION. This innovative product can be used in companies, communities and also for private use.
MAN Nuremberg is switching to environmentally friendly vacuum distillation. The result: a three-fold better cleaning of their cooling lubricant emulsions and parts washing water as well as lower operating costs.
In the concept phase of packaging, manufacturers often rely on tried and tested solutions that often block an eye for modern and sales-promoting possibilities. Through the cooperation with W.AG, the product became a self-explanatory service ambassador, without any additional effort.
The design case TWIST of the German manufacturer W.AG Funktion + Design GmbH comes with a puristic design and many innovative functionalities. The plastic case can be customized to the corporate design and the products of the customer on the outside and inside.
The Digimarc barcode, which is invisible to the human eye, eliminates printing costs for paper manuals. The barcode is integrated into the in-mould labeling motif and can be scanned with an app. The user can call up the digital instructions anytime and anywhere.
H2O GmbH will celebrate its 20th anniversary in 2019. Coinciding with the start of this anniversary year, the company is presenting a new system: the VACUDEST XS Clearcat.
13. February 2019
The company Fankhauser Engineering AG knows how important highly flexible machines with long running times are in order to be able to produce profitably. The use of MFC milling cutters enables significant savings in purchasing, tool preparation, machine setup and tool costs.
From small to large series, from technical and detailed parts to voluminous structural parts, we support you in all your projects and problems by producing the technical molds for molding your aluminum or light alloy parts.
Multifunctional high-performance milling MFC. Multifunctionality as a key factor in simplifying the entire manufacturing process. Now with MB-RNVDS extension.
Industrial tool reconditioning with performance guarantee. FRAISA ReTool® is our efficient,
all-round service for the industrial reconditioning of your FRAISA and third-party tools.
SATO has introduced the latest cutting machine innovation, a multifunctional system that combines oxy-fuel cutting, plasma bevel cutting and drilling.
12. February 2019
As first threading specialist ever DC SWISS offer an overall solution for the quality assurance of micro threads: Limit plug gauges, limit ring gauges and master gauges for measuring machines with SCS certificate - everything from a single source.
New solutions for the machining of micro threads with thread whirlers: The multi-tooth full profile VHM thread whirler guarantees a burr-free thread. There are no eyebrows at the transitions and edges of the thread.
Pipes for refrigeration applications, air conditioning, heating, heat pumps, heat exchangers, solar thermal, piping systems and plants for liquids and gases
8. February 2019
Economic front and back chamfering in one operation, with very easy blade changes. Removes burrs radially without requiring the work piece to be turned.
BSF allows back spotfacing up 2.3 times the bore diameter. It enables the machining of spot facings and counterbores without reclamping of the work piece.
Consistent deburring of even and uneven bore edges, front and back in one single pass. Both bore edges will be machined without requiring the work piece to be turned. For efficient and process capable high volume production.
With the latest CNC turning and milling technology, we manufacture technical plastic components from single part up to serial production. Our polytechnicians are specialized in mastering complex components.
The GOODJ automation solutions are modular and can be scaled in the simplest way. Automation can easily react to changing market conditions. This is especially important for contract manufacturers.
Meet the customer's needs regarding the rapid supply of strategic spare parts for the ordinary and extraordinary maintenance of their automatic machine lines.
7. February 2019
KERAFOL® - Keramische Folien GmbH was founded in 1985 and has over 200 employees at the moment.
We develope and produce ceramic tapes for versatile applications with a special manufacturing process.
These tapes may then be used unsintered as a final product or sintered as a planar ceramic component.
A customer was looking for bar feeders and air filter systems for its machine tools that would guarantee maximum productivity while taking up as little space as possible. Find out how the solution of LNS Europe met these criteria and how at the same time the production layout could be optimized.
The LNS customer service and technical support teams are the industry’s most experienced. They provide expert product selection and application assistance, professional installation and comprehensive training.
We support every product we sell with replacement parts.
LNS ChipBlaster JV-40, the ideal high-pressure coolant solution, designed with variable flows and pressures, to deliver clean filtered coolant for maximum machining productivity.
6. February 2019
Keeping track of everything, precision, organisation and quality are essential when manufacturing precision tools. LISTA products help to achieve perfect organisation of resources and problem-free quality assurance.
Bonding of support brackets to polyethylene cheese moulds. The support brackets are factory welded, but break out in daily use and have to be fixed again. An NSF certificate is not required, there is no contact to the finished cheese.
Work in partnership with customers to optimize time and cost, we offer full service, Machining BIG and MID-SIZE dimension Aluminum plates & Anodizing.
Production of the watch plate brings to birth a craft-produced ‘calibre’ – this is the watchmaker’s term for the centrepiece of an ultra-precise, mechanical luxury watch. IWC Schaffhausen uses a KERN Micro for the operation, to guarantee a high standard of process reliability and repetition accuracy
5. February 2019
Press automation in which the various axes are equipped with KABELSCHLEPP cable carrier systems and signal cables, pneumatic hoses and lubrication lines are carried along.
Polishing blasting equipment PolishPeen 770 for perfect, gloss polished surfaces on PVD- / CVD-coated cutting and moulding tools, punching, cutting and forming tools, watch and jewellery parts as well as for the medical and pharmaceutical industry
DATRON neo makes your entry into high-speed milling particularly easy. Due to the plug & play principle, you can immediately become productive with this 3-axis CNC milling machine based on the newly developed DATRON next software.
Extremely rugged shock recorder for exact verification of the transport quality. With integrated GPS receiver and inclination sensor. Connection for optional combination sensor for pressure / temperature / humidity.
Electronic access control for added security: Where different levels of security and access rights are crucial. LISTA‘s variety of access control systems offer the perfect solution.
Whether for warehouse or workshop, assembly, production, recreation area or office: whatever you want to equip, we are there with comprehensive and professional support from planning to after-sales service.
The production of tension and burr free exact watch parts, spacing foils, feeler gauges, shims, masks, covers, and housing components put extreme demands on the laser technology.
With the OnlineEngineer you can select and configure the suitable TSUBAKI KABELSCHLEPP energy chain for your application in just a few steps. As a registered user, you have access to all functionalities. But you can also configure energy chains with a guest login.
Our engineers combined the internal device components of the compact coffee machine of Thermoplan into modules without screw connections, for easy assembly and maintenance. Despite the highly compact design, smart solutions for heat and steam protection guarantee continuous operations.
MASTER LE60/LE80. Quiet and weight-optimized cable carrier with new divider system TS3. Space saving, versatile inner distribution with very fast opening. Width optimized and ready for Industry 4.0.
One of the focus points of DREMICUT is the production of high precision metal stencils with modern laser equipment.
In particular the use of laser cut stencils for solder paste coating for the industrial fabrication of electronic components has become the established practice.
Save your money, as well as your material, time and space resources by using our professional regrinding service for electrodes to keep the high quality.
ORBISTAR® tungsten electrodes for orbital welding: thoriated and thorium-free. Optimum adaptation of the required electrode type to the welding Task; Exact reproducibility of welding processes; Safety and a long service life
The new DURO-A RC power chuck delivers as a true PRICE-PERFORMANCE CHAMPION across the board. With the quick jaw change system and individual unlocking, the jaws can be changed, moved or turned flexibly and with less set-up time in just 50 SECONDS.
WEICON Easy-Mix PE-PP 45 is a two-component construction adhesive on the basis of methyl acrylate. It is in particular suitable for structural, high-strength bonding of Iow energy plastics like PE, PP and TPE.
"FH-Cast" is a process for the production of moulds on a laboratory scale using 3D-printed, meltable plastic positives. The aim is to be able to produce moulds with a high degree of geometric freedom and low personnel and infrastructure costs.
4. February 2019
A machine builder needed plastic parts with specific criteria for the construction of the interior of a machine. Learn how Acryline supported its customers with know-how, starting with the choice of suitable materials, prototype production up to the production of the series.
At the steel trader Kicherer things got tight again: the growing demands for ever shorter delivery times made a more efficient warehouse unavoidable. With the KASTO solution, the company can ensure its high delivery quality and speed with a growing product range.
Industry 4.0 means individualized mass production. Autexis Holding AG, Chocolat Frey AG and the FHNW Institute for Automation have jointly developed a picking system that delivers a personalized chocolate mixture to your home via Twitter after the order has been placed.
A zinc coating plant was looking for ways to increase its capacity. Read how the company achieved this goal by investing in-drum dryers and consumes up to 60% less energy than by using comparable exhaust air dryers.
31. January 2019
Additive manufacturing allows for the direct conversion of design construction files into fully functional objects. Many methods of additive manufacturing require subsequent heat treatment of the manufactured components.
29. January 2019
Special telescopes had to be developed for an international Mars project. This required not only a special coating, but also specialist know-how. Learn how the Mars telescopes were successfully produced in cooperation with Buser Oberflächentechnik.
For over 40 years Trimos has offered a wide range of products and solutions in the field of dimensional metrology. Find out how the company was able to increase its productivity and flexibility by using the FEHLMANN VERSA 825.
MEGA GOSSAU AG offers you a unique performance package: everything from a
single source, from the implementation of your idea - design engineering - via toolmaking, die-casting, processing, grinding and polishing to surface finishing.
OTEC machines allow the quality of carbide tools to be improved considerably. The special procedure enables the chip grooves of carbide cutters and drill bits, for example, to be polished to a high gloss.
GPM is since 16 years Swiss quality manufacturer for precision machining, tolerance can reach 0,005 mm, complete machining technical. Send us your drawings and we will make you an offer.
25. January 2019
Government sponsored drying ovens and drying plants with heat pump technology – fast, reliable, gentle and low-energy drying in a closed system at low temperatures.
The RXP machine models are the most sold and most comprehensive model range of Röders. From micro machining to workpieces with dimensions over 1 meter multiple machine models with 3 or 5 axes are available.
DISA has a own, from the SAS accredited labor (SCS 0083), for force- and torque devices ( until 1000Nm/1000N). We also calibrate some bigger load cells like PAT-Meter, Hirschmann, Krüger etc.
24. January 2019
Tooling Steel with hardening HRC 55-60, hard metal welding,assembly according to the drawings, jigs function test , send your drawings and get quote soon.
With the Mobile Bending Cell, Bystronic takes the next evolutionary step in the field of bending. There is now a mobile automation module for the Xpert 40. The result is a compact solution for automated and manual bending.
"Quick change diameter" is a modular, quick change system of tool-holders with cylindrical shaft for automatic lathes. With this system, It is no longer necessary to remove the tool-holder from the drill unit!
Deep milling is a well-known constraint in chip removal machining. While this type of milling requires simple parameter adjustment with large tools, the situation is quite different for end mills with a cutting diameter of less than 1 mm.
Bélet tools are made to last. Most tools can be reconditioned, either if manufactured by Bélet or by our competitors. Profiled tools with constant or logarithmic relief can also be reconditioned on our specialized machines.
The ESM303 is a test bench for tensile and compression force tests up to 1.5 kN. With its robust design it is very well suited for laboratory and production applications.
Quality safety with ESM1500 from Mark-10 for to use as a fully automatic calibration test stand for strain gauge sensors used at DISA Elektro AG. A complete customized system includ voltage gauge and software application.
REF. 5000 - The profile is perfect and inside the tightest tolerances. And this is verified over time. We believe the result is very conclusive. The thread is suitable and complies with ISO specifications.
In addition to the usual services, OTEC offers services tailored to your individual needs. With a comprehensive network of service employees all over the world, OTEC reliably takes care of you with preventive maintenance, inspections and all-round service.
23. January 2019
Bronze, brass, aluminum foundry by shell molding and centrifugal casting. Mechanical processing up to 2.000 mm diameter. UNI EN ISO 9001:2015 certified.
Bronze, brass, aluminum mechanical parts according to the customer drawing. Both serial production and little batches. UNI EN ISO 9001:2015 certified.
Design and manufacture of a watercooled stainless steel vacuum chamber with individual connections and feedthroughs. From the idea to the finished product from one source.
See and experience networked processes. With this focus, the "Automation Days" take place every 2-3 months in the AMD Technology Center, directly next to the motorway in Sargans.
A manufacturer of medical equipment wanted to reduce his cycle time in order to be able to offer his workpieces cost-effectively. Learn how a Denitool expert's recommendation reduced the cycle time and lowered the manufacturing costs.
21. January 2019
Im ständigen Bestreben unser Leistungsangebot zu verbessern und den Markt- bzw. Kundenbedürfnissen anzupassen, bieten wir Ihnen ab sofort das NEU entwickelte TolNit-Verfahren an.
Since 2006 Subforama provides industrial subcontracting solutions through its wide range of Italian suppliers specialising in different processes of mechanical subcontracting. Subforama supports buyers in the outsourcing of custom-made components.
Discover why Franke Industrie AG, a worldwide player in the aerospace and power generation industry, ditched shrink-fit and switched to powRgrip to increase profitability.
High-precision machining centre, 6 to 9 axes, milling/turning from bar stock, back machining unit, parts fully machined in a single cycle, positioning accuracy
The SF1 ILS is the new standard in automated precision finishing. It's the compact OTEC base model for tool processing with automatic loading. All these features make the SF1 ILS an extraordinarily effective and flexible machine. Ideal for processing small batch sizes and frequently changing series.
If you feel that your time is precious and it is not worth wasting it, then Subforama is the right solution for your current and future needs. www.subforama.com
SCHMIDT ® ElectricPress - A new Approach to Assembly Technology:
Extremely Energy Efficient; easy parametrization of position, force and speed; intuitive control; all-electric
17. January 2019
Vulkollan® is one of the most powerful elastomers on the market and combines the highest mechanical load-bearing capacity with the highest dynamic load-bearing capacity. For this reason, Vulkollan® is preferred in many technical areas.
16. January 2019
ALESA - The solution partner. Our employees will be pleased to support you with their professional competence in optimising your process. Especially for difficult materials such as titanium, duplex or composite.
Six sharply ground cutting edges mounted tangentially on the milling body ensure excellent tool life and process reliability. This increases productivity and improves the quality of the workpiece.
15. January 2019
The newly developed X technology from sia Abrasives coats the abrasive with a cooling agent in a special process. The active cooling agent reduces the heat generated during grinding and thus extends the service life of the disc.
The labelling of medical devices presents manufacturers with challenges: Requirements are increasing and regulations are becoming stricter. As a manufacturer of laser marking equipment and marking solutions, we develop reliable solutions to ensure your process reliability.
We will advise you free of charge on site on the selection of the right ergonomic workplace mat. The installation is just as much a part of our service as the delivery.
The world's first dirt trap floor mat with adhesive backing. No waves, no slipping, absorbent and, fast drying, designed for extreme traffic, easy to clean, saves time and money.
A waterjet utilizes a high-pressure stream of water to erode a narrow line in the stock material. To cut a wider range of materials from tool steel to titanium to foam, a granular (typically garnet) abrasive is added to the waterjet, increasing the cutting power.
14. January 2019
The process setup (build orientation optimization and support structure design) for a pre-existing part is of large practical importance, e.g., in the service and reconditioning market. It is demonstrated here for a pump impeller.
IDS Casting Service GmbH deburrs around 2,500 gearbox or clutch housings every day. Find our how IDS was able to increase its efficiency by using robot spindles from Biax.
The BIAX Modular System is the most effective and cost-efficient solution for automated deburring with a robot or a CNC machine on the market. You pay only for the parts which you really need!
10. January 2019
Chemical etching is the perfect technique for fast prototyping and high volume production of metal parts. This method allows production with no expensive tools and delivery of no longer than 3 weeks.
For tube machining on a special lathe, no standard ISO tools could take over the task. Read how Denitool developed a special tool that allows the machine to process two tube ends simultaneously.
SynTool is adapted for standard holders. Achieve around 70% cost savings per edge compared to monobloc inserts. For applications which are not possible with standard monobloc turning inserts, we offer HM-shank inserts for Denitool® inserts.
For more than 40 years we are engaged in the production of elements and details in ABS, PST, PE Polypropylene compound. Efficiency, quality, and reliability are the keywords of our activity.
8. January 2019
KEYENCE products are designed to optimize our customers' manufacturing and research processes. Our in-house research and development team continuously develops our product range to meet our customers' high quality standards.
3. January 2019
The cutting edges are extremely sharp and precise due to the laser cutting process. Attaching chip grooves or chip breakers by laser increases the service life of the tool and process reliability.
Weiss AG stands for innovative and productivity-increasing Diamond and CBN tools. With the M-Dresser you can dress diamond and CBN grinding wheels very easily and quickly.
Wittich is now the Swiss partner of SISMA for laser marking and engraving systems. The products will be presented for the first time at the Prodex 2019.
27. December 2018
Our company provides cutting and finishing services for perfect product fitting. We also provide additional services for accessories and extra operations.
20. December 2018
Whether in your workshop, in the industrial hall or directly on your construction site in the Alps - our control service is on the road for you throughout Switzerland.
Discover our new online shop for lifting, gripping, protecting, securing and transporting. New and modern design, Full Responsive and flexibly adapts to any device, informative magazine with exciting articles on specialist topics, even better configurators and much more.
17. December 2018
High-performance bandsaw machine for separating components made of materials that are easy to difficult to machine from their base plate using an additive manufacturing process.
12. December 2018
Every day we hear how bad the air is in our cities. However, hardly anyone talks about indoor air quality, and there is a much greater danger lurking here. Don't wait any longer and let us help you improve your working environment.
DERO Line HRK offers high precision for 5-sided machining of your workpieces, even with the highest clamping forces. Process-safe clamping without pre-stamping.
Huf UK intended to achieve a particularly high "Right First Time" rate. Find out how the company made its operations more efficient and competitive through the cooperation with Zehnder Clean Air Solutions.
11. December 2018
We develop innovative machines for tailor-made applications. From the concept to the tested and approved machine, you receive everything from a single source.
4. December 2018
One of the biggest advantages of industrial air purification is the improvement of indoor air. Whether it's dust, spores, pollen, emulsions or smoke particles, our innovative filter technology offers the right solution for clean air in your production or logistics facility.
3. December 2018
By using the GOODJ 125 TAIFUN you lay the foundation for successful automated production and have full controll of process materials and process waste.
29. November 2018
LIFE. COMBINED INTELLIGENTLY.
A functioning organism in which all LIFE components interact intelligently. Whether for a single SW machine, a fully automated system or a complete production line. We supply and support everything for you to guarantee efficient production for years to com.
28. November 2018
Good old trade fairs remain an indispensable marketing instrument for companies today. Even in the digital world, nothing beats personal contacts. IDM enables South Tyrolean companies to participate in trade fairs at South Tyrolean joint booths.
Universal Robots, the pioneer and market leader of collaborative robots, is continuing to evolve its ground-breaking, collaborative automation technology with the introduction of its new flagship e-Series cobots.
22. November 2018
In industrial sectors, where brass in combination with drinking water is subjected to ever stricter controls, new alloys are increasingly conquering the market. Read how Manometal has been able to create a customer-specific solution within a very short time using specially developed machining tools.
20. November 2018
Machining simple or complex precision parts — whether 5-axis with positioning or 5-axis simultaneous milling, the FEHLMANN VERSA 645 linear masters any demanding complex task with flying colours — accurately and reliably.
19. November 2018
The produced automatic lathe parts in different brass alloys and stainless steel alloys are assembled and packed to final products or semi-finished products.
Since 2018 Manometal GmbH offers precision turned parts in various stainless steel alloys. Our offer includes Ø 15 mm to max. Ø 80 mm turned from the bar.
The Hermle C 650 3- or 5-axis machining centre from Hermle is a significant addition to the Performance-Line series and sets new standards in economical parts production.
16. November 2018
JOBDISPO is a dynamic production planning and scheduling tool. The graphical planning board enables you to visualize your resource utilisation and availability across the shop floor in real time. Planning and scheduling is much more accurate and needs much less effort to maintain it.
Why are our air cleaning systems so efficient? The sophisticated filter technology from Zehnder Clean Air Solutions binds dust particles electrostatically and thus absorbs large amounts of dust.
15. November 2018
The Instant Measurement System improves your quality and inspection process thanks to its rapidity, precision, automatic data recording, and ultra wide stage to measure larger target.
Fully automated production offers numerous advantages: faster production, better quality and transparent processes. For this vision to become reality, a powerful and fully integrated measurement technology with interfaces to all control units is necessary
7. November 2018
With the 5th axis provided by the workpiece, the 5-axis machining centre from the HF series deliver a significant reduction in idle times in combination with the powerful dynamics and a horizontal spindle for shortest chip-to-chip times
31. October 2018
HEICO-LOCK® Wedge Locking System: Wedge Lock Washers // Ring Lock Washers // Wedge Lock Nut // Wheel Nut // HLK-Washers // Combi-Washers - HEICO-TEC® Tensioning System: Tension Nut // Reaction Nut
The HEICO group's in-house testing laboratory provides professional support in the development of new and innovative products for bolted connections.
30. October 2018
Compact ultrasonic solutions for highest levels of cleanliness and flexibility. In the dental lab, the dentist's office or with the hearing aid specialist: The KKS Basic Line table top devices are the ideal solution for small to medium business professionals applications!
If hard and scratch-resistant surfaces are required for implants and instruments made from titanium and titanium alloys, our customers use the dark anodizing process TioDark™
To use this functionality, you need to be logged in
We'll send you an email containing a direct access link.
You have been logged in.
In order for you to get in touch, we will forward the following information to this provider:
We'll be suggesting suitable topics, exhibitors, articles, program items and further information.